Samsung AR12HSSDPWKNEE, AR09HSSDPWKNEE manual Adding refrigerant

Page 20

Step 3.4 Adding refrigerant

If you use a pipe longer than the length specified in the piping codes and standards, you must add 15g of refrigerant R-410A for each extra metre. If you use a pipe shorter than the length specified in the piping codes and standards, the evacuating time is normal. Refer to the Service Manual for further details.

CAUTION

The remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction of the compressor.

Always contact the service centre or a professional installation agency for product installation.

R-410A is a mixed type of refrigerant. It is necessary for recharging under conditions of liquid. When recharging refrigerant from the refrigerant cylinder to the equipment, take the following instructions:

Before recharging, check whether the cylinder has a siphon or not. There are two ways to recharge the refrigerant:

 

 

 

 

Siphon

 

 

 

 

 

 

 

 

 

 

 

 

 

Charge the refrigerant

 

 

 

 

Charge the refrigerant turning

standing the cylinder upright.

the cylinder upside down.

<Cylinder with siphon>

<Cylinder without siphon>

NOTE

If R-410A refrigerant is charged with gas, the composition of the charged refrigerant changes and the characteristics of the equipment vary.

During the measuring operation of refrigerant quantity added, use electronic scales. If cylinder doesn't have siphon, upset it.

Step 3.5 Important information regulation regarding the refrigerant used

This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere.

CAUTION

Inform user if system contains 5 tCO2e or more of fluorinated greenhouse gases. In this case, it has to be checked for leakage at least once every 12 months, according to regulation n°517/2014. This activity has to be covered by qualified personnel only. In case

situation above (5 tCO2e or more of R-410A), installer (or recognized person which has responsibility for final check) has to provide a maintenance book, with all the information recorded according to REGULATION (EU) No 517/2014 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 April 2014 on fluorinated greenhouse gases.

1Please fill in the following with indelible ink on the refrigerant charge label supplied with this product and on this manual.

the factory refrigerant charge of the product,

the additional refrigerant amount charged in the field and

+ the total refrigerant charge. on the refrigerant charge label supplied with the product.

Refrigerant type

GWP value

 

 

R-410A

2088

 

 

GWP=Global Warming Potential

Calculating tCO2e : kg x GWP / 1000

Indoor unit

Outdoor unit

Unit

Kg

tCO2e

, a

, b

①+②, c

English 19

Installation

A3050 EE Better IM_DB68-06139A-00_EN_A5.indd 19

2016/5/6 10:32:07

Image 20
Contents A3050 EE Better IMDB68-06139A-00ENA5.indd 2016/5/6 Air conditioner Contents Safety Information on Installation General informationPower supply line, fuse, or circuit breaker Choosing the installation location Overview of installation location requirementsPreparation Minimum clearances for the outdoor unitChecking and preparing accessories and tools AccessoriesDrilling a hole through the wall ToolsTaping the pipes, cables, and drain hose Drill the hole Be sure to drill only one holeIndoor Unit Installation Disassembling the cover panelConnecting the power and communication cables assembly cable Optional Extending the power cable Prepare a compressor and the following toolsInstalling and connecting the drain hose Optional Extending the drain hoseOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe 10 Fixing the installation plate When fixing the indoor unit on a wallWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum board11 Fixing the indoor unit to the installation plate 12 Assembling the cover panelOptional Fixing the outdoor unit to a wall with a rack Outdoor Unit InstallationFixing the outdoor unit in place Evacuating the air Adding refrigerant Installation Performing the gas leak tests Installation InspectionRunning the Smart Install mode LED Pumping down for removing the product Performing final check and trial operationPumping down refrigerant Display Error and Check Method DescriptionA3050 EE Better IMDB68-06139A-00ENA5.indd 2016/5/6
Related manuals
Manual 35 pages 32.76 Kb Manual 35 pages 41.66 Kb Manual 35 pages 39.98 Kb Manual 35 pages 42.62 Kb Manual 21 pages 35.09 Kb Manual 21 pages 35.92 Kb Manual 21 pages 45.16 Kb Manual 21 pages 32.84 Kb Manual 25 pages 30.63 Kb Manual 26 pages 17.38 Kb Manual 1 pages 46.73 Kb Manual 35 pages 41.68 Kb Manual 26 pages 26.34 Kb Manual 26 pages 17.72 Kb Manual 26 pages 17.61 Kb Manual 1 pages 30.99 Kb

AR12HSSDPWKNEE, AR09HSSDPWKNEE specifications

The Samsung AR09HSSDPWKNEE and AR12HSSDPWKNEE are part of Samsung's high-efficiency air conditioning lineup, designed to provide superior comfort while ensuring energy savings. These models are particularly popular for their advanced technologies and user-friendly features, making them ideal for residential and small commercial spaces.

One of the standout features of both models is the Digital Inverter Technology. This innovative technology maintains the desired temperature without the constant on-and-off cycling typical of conventional air conditioning units. As a result, these units provide a more stable cooling experience, while significantly reducing energy consumption. The Digital Inverter also helps in minimizing wear and tear, leading to increased lifespan and reduced maintenance needs.

The AR09HSSDPWKNEE and AR12HSSDPWKNEE are equipped with the Triple Protector Plus technology, which offers enhanced durability and reliability. This feature protects the compressor and provides safety against voltage fluctuations. Additionally, the units are designed to operate in extreme weather conditions, ensuring consistent performance even in high temperatures or low-voltage situations.

Another notable feature is the Fast Cooling mode. This allows the air conditioner to cool the room quickly to the desired temperature, making it incredibly convenient during hot weather. The units also come with a Quiet Mode, which minimizes noise levels, making them suitable for bedrooms or quiet spaces.

Energy efficiency is a critical characteristic of these models. With high energy efficiency ratings, they help in lowering electricity bills while being environmentally friendly. The units are also designed to be eco-conscious, with R32 refrigerant, which has a lower global warming potential than traditional refrigerants.

In terms of user interface, the AR09HSSDPWKNEE and AR12HSSDPWKNEE come with a sleek and intuitive remote control, allowing users to manage settings conveniently from anywhere in the room. Additionally, they feature a filtration system that improves indoor air quality by removing dust and allergens, creating a healthier living environment.

Overall, the Samsung AR09HSSDPWKNEE and AR12HSSDPWKNEE air conditioners combine cutting-edge technology, efficiency, and user-friendly features, making them an excellent choice for anyone looking to enhance their home’s comfort while keeping energy costs in check.