Installing Your Microwave oven

Place the oven on a flat, level surface that strong that is enough to safely bear the weight of the oven.

20cm	10cm	1.	When you install your oven, make sure there is adequate
above	behind		ventilation for your oven by leaving at least 10 cm
			ventilation for your oven by leaving at least 10 cm
			(4 inches) of space behind and, on the sides of the oven
	10cm		and 20 cm (8 inches) of space above.
	10cm
	of the side

2.Remove all packing materials inside the oven.

Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

☛Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

☛For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable (I-SHENG SP022, KDK KKP4819D, EUROELECTRIC 3410, SAMIL SP- 106B, MOONSUNG EP-48E, HIGH PROJECT H.P 3). Contact your local dealer to have it replaced. The power cable of ISRAEL is PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).

☛Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

What to Do if You are in Doubt or Have a Problem

If you have any of the problems listed below try the solutions given.

◆This is normal.

•Condensation inside the oven

•Air flow around the door and outer casing

•Light reflection around the door and outer casing

•Steam escaping from around the door or vents

◆ The oven does not start when you turn the Time/Weight() dial.

•Is the door completely closed?

◆The food is not cooked at all

•Have you set the timer correctly and/or turn the Time/Weight() dial.

•Is the door closed?

•Have you overloaded the electric circuit and caused a fuse to blow or a breaker to be triggered?

◆The food is either overcooked or undercooked

•Was the appropriate cooking length set for the type of food?

•Was an appropriate power level chosen?

◆Sparking and cracking occur inside the oven (arcing)

•Have you used a dish with metal trimmings?

•Have you left a fork or other metal utensil inside the oven?

•Is aluminium foil too close to the inside walls?

◆The oven causes interference with radios or televisions

•Slight interference may be observed on televisions or radios when the oven is operating. This is normal.To solve this problem, install the oven away from televisions, radios and aerials.

•If interference is detected by the oven’s microprocessor, the display may be

reset.To solve this problem, disconnect the power plug and reconnect it. Reset the time.

✉If the above guidelines do not enable you to solve the problem, contact your local dealer or SAMSUNG after-sales service.

M182DN-S/XEE, M182DN/XEE specifications

The Samsung M182DN/XEE and M182DN-S/XEE are compact, multifunction monochrome laser printers designed for small to medium-sized businesses that seek efficiency without compromising on quality. These printers are tailored to meet the demands of modern workplaces, combining functionality, speed, and robust performance to enhance productivity.

One of the standout features of the M182DN series is its versatile printing capabilities. Both models support automatic duplex printing, which significantly reduces paper consumption by allowing users to print on both sides of the page seamlessly. This eco-friendly feature is not only cost-effective but also contributes to sustainability efforts. The printers produce professional-quality prints with crisp text and sharp graphics, making them suitable for producing reports, presentations, and invoices.

Speed is another key characteristic of the M182DN models. They boast impressive print speeds of up to 28 pages per minute. This rapid output is paired with a first-page-out time of approximately 8.5 seconds, ensuring that users spend less time waiting for their documents. The printers come equipped with a 250-sheet input tray and a 150-sheet output tray, providing ample paper capacity for day-to-day printing tasks without frequent interruptions.

In terms of technology, both models leverage Samsung’s innovative LaserPrint technology, ensuring high-quality output with a resolution of up to 1200 x 1200 dpi. This technology guarantees clear, detailed prints that are vital for professional documentation. Additionally, the printers support various media types, including plain paper, recycled paper, and envelopes, catering to diverse printing needs.

Connectivity options are also plentiful, with both printers offering USB and Ethernet interfaces. This allows for easy integration into existing network environments, making it straightforward to share the printer among multiple users. The M182DN-S/XEE variant additionally features wireless printing capabilities, enabling users to print from their smartphones or tablets via various mobile printing solutions.

Maintenance is simplified with easy-access toner cartridges that help minimize downtime. The printers are compatible with Samsung's high-yield toner cartridges, which deliver more prints per cartridge, ultimately reducing the cost per page and enhancing productivity.

In summary, the Samsung M182DN/XEE and M182DN-S/XEE deliver a powerful combination of speed, quality, and efficiency, making them ideal choices for businesses looking to streamline their printing operations while maintaining high standards.