Samsung BQ1D4T144/XEE manual Rapid drying, Catalytic enamel surface Optional, Hand cleaning

Page 20

Rapid drying

1.Leave the oven door ajar at approximately 30 °.

2.Set the operation knob to single mode.

3.Press the function button.

4.Select convection with the selector knob.

5.Set a cooking time of about 5 minutes and a temperature of 50 °C.

6.Switch the oven off at the end of this period.

Catalytic enamel surface (Optional)

The removable cover casing is coated with a dark gray catalytic enamel this can become coated with oil and fat distributed by circulating air during convection heating. These deposits will burn off at oven temperatures of 200 °C and higher, for example, while baking or roasting. Higher temperatures will result in faster burning.

1.Remove all accessories from the oven.

2.Clean all interior oven surfaces as described in the hand cleaning section.

3.Set the oven to upper- and lower heat.

4.Set the heat to 250 °C.

5.Run the oven for approximately 1 hour. The length of time depends on the degree of soiling. Any remaining soil will gradually disappear with each subsequent use of the oven at high temperatures.

Hand cleaning

CAUTION: MAKE SURE THE OVEN AND ACCESSORY IS COOL BEFORE CLEANING

Oven Interior

For cleaning the interior of the oven, use a clean cloth and a mild cleaning agent or warm soapy water.

Do not hand-clean the door seal.

Do not use scouring pads or cleaning sponges.

To avoid damaging the enameled oven surfaces, use customary oven cleaners.

To remove stubborn soil, use a special oven cleaner.

Do not use abrasive cleaning agents, hard brushes, scouring pads or cloths, steel wool, knives or other abrasive materials.

Oven exterior

For cleaning the exterior of the oven, use a clean cloth and a mild cleaning agent or warm soapy water.

Dry with kitchen roll or a dry towel.

Do not use scourers, caustic cleaners or abrasive products.

Stainless steel oven fronts

Do not use steel wool, scouring pads or other abrasives. They may damage the finish.

Aluminum oven fronts

Wipe the surface gently with a soft clean cloth or micro fiber cloth and a mild window cleaning detergent.

Accessory

Wash the accessory after every use and dry it with a kitchen towel. If necessary, lay in warm soapy water for about 30 minutes for easier cleaning.

20_cleaning & care

BQ1 Series_XEE_00069Z-01-EN.indd 20

2011-07-04 �� 10:59:29

Image 20
Contents Built-in Oven Electrical safety Using this manualSafety instructions Safety during operation Disposing of old appliances Disposal InstructionsDisposing of the packaging material Installation of Child door-lock Child door-lockTo use it Child door-lock removalAccessory Oven controlsTest dishes Functions BakingConventional ConvectionSingle mode Single ModeTurn Selector knob , apply Press Temperature keyTwin cooking `settings Set cooking timeSet end time Optional ADD Cooking TimeChange temperature Time settingChange times set Turn Selector knobSet alarm Deactive alarmTone signal Switch offSingle oven auto cook programmes Food Item Weight/kg Accessory Shelf Recommendation LevelAutomatic cooking Automatic cooking15 Installation & maintenance InstallationTechnical specifications Power connectionInitial setup TroubleshootingInitial cleaning Problem SolutionCode Problem Solution Information codesSteam cleaning notes Cleaning & careSteam cleaning Optional Catalytic enamel surface Optional Hand cleaningRapid drying Detach the covering and remove glass 1 from the door Door removalDoor glass removal Side runners optional Detaching the side runnersOven side light Optional Bulb exchangeRear oven lamp Code No. DG68-00069Z-01
Related manuals
Manual 48 pages 53.59 Kb Manual 48 pages 63.16 Kb