Turbo Chef Technologies Tornado Supplies and Equipment, Prepare the Oven, Lift Bottom Element

			MAINTENANCE AND TROUBLESHOOTING			25
1	2	3		4	5

6 7 8 9 10

DAILY MAINTENANCE FOR THE TORNADO

When cleaning the oven, use only TurboChef Oven Cleaner. Any other cleaning products can damage critical parts, resulting in a non-warranty service call.

Supplies and Equipment

TurboChef Oven Cleaner (P/N 103180 USA, 103380 Intl), Oven Guard (P/N 103181 USA, 103381 Intl), nylon scrub pad, cleaning towel

Step 1: Prepare the Oven

†Turn oven off by pressing the BACK key.

†The oven will display OVEN OFF/COOLING DOWN. †x D O N O T attempt to clean oven during the cool

down cycle. Cooling takes appx. 90 minutes.

WARNING: The oven operates at appx. 500ºF (260ºC) and may cause injury if not allowed time to cool properly.

Step 2: Remove the Lower Access Panel

†Wipe out any crumbs that have collected.

Step 3: Remove and Clean the Cooking Surface

†If rack, wash, rinse, and sanitize.

†If baking stone, gently dry-scrub. If the stone gets wet, let it thoroughly air-dry.

Step 4: Lift Bottom Element

†Be sure the bottom element is cool prior to lifting.

WARNING: The bottom element operates at appx. 1000ºF (537ºC).

Step 5: Remove Particles and Spray Oven Interior with TurboChef® Oven Cleaner

†Using a damp towel, remove large food particles.

†If stubborn stain is present, sparingly spray TurboChef Oven Cleaner onto the stain.

†Allow cleaner to penetrate for five (5) minutes. †x D O N O T saturate the bottom of the oven with

water or oven cleaner.

Step 6: Clean Oven Interior

†Using a nylon scrub pad, clean the oven door and cook cavity.

C A U T I O N : DO NOT apply pressure to the wave guide covers. Breaking will result in a non-warranty service call.

Step 7: Wipe Out Oven Interior

†Wipe oven door, bottom element, and cook cavity using a damp towel.

Step 8: Clean Lower Access Panel Area

†x D O N O T spray any chemical in this area or into any other openings in the oven, such as the louvers in the side panels or the cooling fan on the back cover. Doing so will damage critical electrical components and result in a non- warranty service call.

Step 9: Lower the Bottom Element and Reinstall the Cooking Surface and Lower Access Panel

Step 10: Apply Oven Guard and Clean Oven Exterior

†Spray Oven Guard on towel. Wipe sides of cook cavity and inside of door.

†x D O N O T spray Oven Guard directly into cook cavity or wipe on nozzle plates/bottom element.

†Wipe the oven exterior with a clean, damp towel.

†Oven is ready to turn on.