Chief Manufacturing MIWRF Series installation instructions YAW Tension Adjustment

Page 10

MIWRF SERIES

Installation Instructions

YAW Tension Adjustment

The mount is designed to accommodate up to 37.5 deg. of travel to left and right of center.

To adjust YAW tension:

1.With display installed, loosen adjustment screw using hex wrench. (See Figure 18)

2.Check for desired tension.

3.Repeat Steps 1 and 2 until desired tension is obtained. NOTE: If changing from a smaller display to a larger display

may be necessary to increase tension.

1

3

TOP VIEW

Figure 18

10

Image 10
Contents Miwrf Series Disclaimer Important Warnings and CautionsTools Required for Installation and Parts Installation Miwrf Series Cover and Trim Installation Cover InstallationDisplay Installation Trim InstallationPitch Tension Adjustment AdjustmentsRoll Adjustment Extend/Retract Tension Adjustment Display Height AdjustmentYAW Tension Adjustment Dimensions +31 040