Chauvet DMX-500 user manual Setup, Power, Lamp Installation

Page 6

SETUP

Lamp

You will need to install a lamp prior to the initial operation of the fixture. An ELC 250W halogen lamp is included.

Warning!

When replacing the lamp, please wait 15 minutes after powering down to allow the

 

unit to cool down! Always disconnect from main power prior to lamp replacement.

Do not touch the envelope (glass area) of the bulb with bare hands. If this happens, clean the lamp with alcohol and wipe it with a lint free cloth before installation.

LAMP INSTALLATION

1)Remove the lamp cover screw and slide our lamp cover.

2)Remove the top cover completely to expose lamp cage.

3)Make sure the lamp is no longer hot before handling. Hold the lamp by its base and slide it upwards until it is free from the retaining clips. Disconnect lamp from lamp socket.

4)Connect a new lamp to the lamp socket and follow the same procedure as above to insert lamp into lamp cage.

5)Replace top cover and screw.

6)No lamp alignment is necessary for this fixture.

Remove

Philips screws to remove unit

Unit with top cover removed and lamp

Power

Warning!

Verify that the power label on your unit matches the line voltage applied. All fixtures

 

must be connected to circuits with a suitable Earth Ground.

To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart.

A fixture’s listed current rating is its average current draw under normal conditions.

All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch.

Before applying power to a fixture, check that the source voltage matches the fixture’s requirement.

All fixtures must be connected to circuits with a suitable Earth Ground.

DMX-500 User Manual

6

Revision: 10/11/2006 1:11 PM

Image 6
Contents DMX-500 Table of Content Safety Instructions What is includedAC Power Before YOU BeginFeatures IntroductionDMX Channel Summary Product Overview Lamp Cover Remove screw to slide outLamp Installation SetupPower LampMounting Manual FocusingFuse Replacement OrientationMASTER/SLAVE Settings Operating InstructionsOperating Modes Setting the Starting Address MASTER/SLAVE Show CustomizationAddress Pin # Appendix DMX PrimerFixture Linking DMX Channel Values No StrobeMaintenance Returns ProcedureClaims General Troubleshooting Light ControlleTechnical Specifications Power

DMX-500 specifications

The Chauvet DMX-500 is a versatile and powerful DMX lighting controller, meticulously designed for both professional and aspiring lighting technicians. This controller has gained popularity in the entertainment and event industries, thanks to its intuitive interface and robust feature set that simplify the lighting design process.

One of the key features of the DMX-500 is its ability to control up to 512 DMX channels. This allows users to manage a comprehensive array of lighting fixtures, effects, and other DMX-compatible devices. The controller supports a variety of protocols, making it compatible with a wide range of equipment, which enhances its versatility in diverse settings such as concerts, theater productions, and special events.

The DMX-500 is equipped with a well-structured interface that includes an LCD display along with tactile buttons and faders, making navigation and operation straightforward. The layout is user-friendly, enabling quick access to vital functions and settings. The inclusion of multiple faders allows for precise control over dimming, pan, tilt, and other attributes of the lights, facilitating seamless integration into any lighting design.

One of the standout technologies incorporated in the DMX-500 is its built-in effects generator. This feature enables users to create dynamic lighting effects on-the-fly, adding a layer of creativity to performances. The controller also supports programmable chases and scenes, allowing for intricate and synchronized arrangements that can enhance the overall atmosphere of an event.

Another powerful characteristic of the DMX-500 is its MIDI compatibility, which enables integration with other MIDI devices. This opens up possibilities for advanced control and creative workflows, making it a valuable tool for concert production and complex setups.

The DMX-500 is designed with durability in mind, suitable for rigorous use in various environments. Its sturdy construction ensures that the controller can withstand the demands of touring and live performances.

In summary, the Chauvet DMX-500 is a multifunctional lighting controller that combines advanced features, user-friendly design, and robust performance. With support for up to 512 channels, intuitive controls, built-in effects, and MIDI compatibility, it stands out as an essential tool in the toolkit of any lighting designer or technician. Whether for live events, theatrical performances, or corporate gatherings, the DMX-500 provides the flexibility and control needed to create stunning visual experiences.