Before YOU Begin, What is included, AC Power

Figure 1 - AC Voltage Switch

BEFORE YOU BEGIN

What is included

¾Intimidator Color™ (DMX-500)

¾Power cord with plug

¾ELC 24V 250W MR-16 lamp

¾Manual with Warranty Card

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

AC Power

To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average current draw under normal conditions. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel

is used solely for a 0% to 100% switch. Before applying power to a fixture, check that the source voltage matches the fixture’s requirement. Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use.

Warning!	Verify that the power select switch on your unit matches the
	line voltage applied. All fixtures must be connected to circuits with a suitable Earth
	Ground.

Safety Instructions

Please read these instructions carefully, which

includes important information about the

•Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

•Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.

•This product is intended for indoor use only!

•To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

•Always disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.

•Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying handles.

•Maximum ambient temperature is Ta: 40°. Do not operate fixture at temperatures higher than this.

•In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.

•Don’t connect the device to a dimmer pack.

•Make sure power cord is never crimped or damaged.

•Never disconnect power cord by pulling or tugging on the cord.

•Avoid direct eye exposure to lamp while it is on.

Caution!	There are no user serviceable parts inside the unit. Do not open the housing or
	attempt any repairs yourself. In the unlikely event your unit may require service,
	please contact CHAUVET.

DMX-500 User Manual

Revision: 10/11/2006 1:11 PM

DMX-500 specifications

The Chauvet DMX-500 is a versatile and powerful DMX lighting controller, meticulously designed for both professional and aspiring lighting technicians. This controller has gained popularity in the entertainment and event industries, thanks to its intuitive interface and robust feature set that simplify the lighting design process.

One of the key features of the DMX-500 is its ability to control up to 512 DMX channels. This allows users to manage a comprehensive array of lighting fixtures, effects, and other DMX-compatible devices. The controller supports a variety of protocols, making it compatible with a wide range of equipment, which enhances its versatility in diverse settings such as concerts, theater productions, and special events.

The DMX-500 is equipped with a well-structured interface that includes an LCD display along with tactile buttons and faders, making navigation and operation straightforward. The layout is user-friendly, enabling quick access to vital functions and settings. The inclusion of multiple faders allows for precise control over dimming, pan, tilt, and other attributes of the lights, facilitating seamless integration into any lighting design.

One of the standout technologies incorporated in the DMX-500 is its built-in effects generator. This feature enables users to create dynamic lighting effects on-the-fly, adding a layer of creativity to performances. The controller also supports programmable chases and scenes, allowing for intricate and synchronized arrangements that can enhance the overall atmosphere of an event.

Another powerful characteristic of the DMX-500 is its MIDI compatibility, which enables integration with other MIDI devices. This opens up possibilities for advanced control and creative workflows, making it a valuable tool for concert production and complex setups.

The DMX-500 is designed with durability in mind, suitable for rigorous use in various environments. Its sturdy construction ensures that the controller can withstand the demands of touring and live performances.

In summary, the Chauvet DMX-500 is a multifunctional lighting controller that combines advanced features, user-friendly design, and robust performance. With support for up to 512 channels, intuitive controls, built-in effects, and MIDI compatibility, it stands out as an essential tool in the toolkit of any lighting designer or technician. Whether for live events, theatrical performances, or corporate gatherings, the DMX-500 provides the flexibility and control needed to create stunning visual experiences.