Chauvet DMX-500 user manual Mounting, Manual Focusing, Fuse Replacement, Orientation, Rigging

Page 7

Setup

Mounting

ORIENTATION

This fixture may be mounted in any position provided there is adequate room for ventilation.

RIGGING

It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.

•When selecting installation location, take into consideration lamp replacement access and routine maintenance.

•Safety cables should always be used.

•Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.

Hanging Clamp

Note!

Clamp is sold separately.

Manual Focusing

To adjust the focus, please follow the instructions below.

1)If operating in stand alone mode, turn the music down so that the unit temporarily stops any activity, other wise turn the lamp on using Channel 4.

2)Rotate the lens gun either clockwise or counter- clockwise until the spot is defined by a hard edge.

Rotate lens gun clockwise and counter- clockwise to achieve desired

IN

Fuse Replacement

Disconnect the power cord before replacing a fuse and always replace with the same type fuse.

With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.

The fuse is located inside this compartment. Remove using a flat head screwdriver.

DMX-500 User Manual

7

Revision: 10/11/2006 1:11 PM

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DMX-500 Table of Content Before YOU Begin What is includedAC Power Safety InstructionsIntroduction FeaturesDMX Channel Summary Lamp Cover Remove screw to slide out Product OverviewLamp SetupPower Lamp InstallationOrientation Manual FocusingFuse Replacement MountingOperating Instructions MASTER/SLAVE SettingsOperating Modes MASTER/SLAVE Show Customization Setting the Starting AddressAddress Pin # DMX Primer AppendixFixture Linking No Strobe DMX Channel ValuesReturns Procedure MaintenanceClaims Light Controlle General TroubleshootingPower Technical Specifications

DMX-500 specifications

The Chauvet DMX-500 is a versatile and powerful DMX lighting controller, meticulously designed for both professional and aspiring lighting technicians. This controller has gained popularity in the entertainment and event industries, thanks to its intuitive interface and robust feature set that simplify the lighting design process.

One of the key features of the DMX-500 is its ability to control up to 512 DMX channels. This allows users to manage a comprehensive array of lighting fixtures, effects, and other DMX-compatible devices. The controller supports a variety of protocols, making it compatible with a wide range of equipment, which enhances its versatility in diverse settings such as concerts, theater productions, and special events.

The DMX-500 is equipped with a well-structured interface that includes an LCD display along with tactile buttons and faders, making navigation and operation straightforward. The layout is user-friendly, enabling quick access to vital functions and settings. The inclusion of multiple faders allows for precise control over dimming, pan, tilt, and other attributes of the lights, facilitating seamless integration into any lighting design.

One of the standout technologies incorporated in the DMX-500 is its built-in effects generator. This feature enables users to create dynamic lighting effects on-the-fly, adding a layer of creativity to performances. The controller also supports programmable chases and scenes, allowing for intricate and synchronized arrangements that can enhance the overall atmosphere of an event.

Another powerful characteristic of the DMX-500 is its MIDI compatibility, which enables integration with other MIDI devices. This opens up possibilities for advanced control and creative workflows, making it a valuable tool for concert production and complex setups.

The DMX-500 is designed with durability in mind, suitable for rigorous use in various environments. Its sturdy construction ensures that the controller can withstand the demands of touring and live performances.

In summary, the Chauvet DMX-500 is a multifunctional lighting controller that combines advanced features, user-friendly design, and robust performance. With support for up to 512 channels, intuitive controls, built-in effects, and MIDI compatibility, it stands out as an essential tool in the toolkit of any lighting designer or technician. Whether for live events, theatrical performances, or corporate gatherings, the DMX-500 provides the flexibility and control needed to create stunning visual experiences.
Top Page Image Contents