Operations
Operations
Control panel
02 |
|
|
|
|
|
| 11 |
08 |
| 09 | 10 |
|
|
| 12 |
07 |
|
|
|
03 | 04 | 05 | 06 |
01 | Cycle Selector | Turn the dial to select a cycle. | ||
|
|
| ||
|
| The display shows current cycle information and estimated time | ||
02 | Display | remaining, or an information code when a problem occurs. | ||
|
| For buttons and icons, refer to the corresponding page. | ||
|
|
| ||
03 | Temp. | Press to change the water temperature for the current cycle. | ||
|
|
| ||
04 | Rinse | Press to change the rinse count for the current cycle. You can set the | ||
rinse count to a max of 5, depending on the cycle. | ||||
|
| |||
|
|
| ||
|
| Press to change the spinning speed for the current cycle. The | ||
|
| revolutions per minute (RPM) differs with the model. | ||
|
| • | Rinse Hold(No indicator): The final rinse process is suspended so | |
|
|
| that the laundry remains in the water. To unload the laundry, run | |
|
|
| a drain or spin process. | |
|
|
| ||
|
|
| rpm numeric indicators turn off. Not available for the DRAIN/ | |
05 | Spin |
| SPIN cycle. | |
• | No Spin : The drum does not rotate after the final drain process. | |||
|
| |||
|
|
| ||
Spin (
) indicator turns on.
•Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press and hold Start/Pause (Hold to Start) to start the cycle. The spinning time depends on the selected cycle.
34 English
2018/2/23 13:35:40