Samsung WD90N642OOW/EE manual DC3

Code		Action
	The Add Door lock/unlock is not working properly.
DC3	• Turn the machine off, and restart the cycle.
	•	If the information code remains, contact a customer service
		centre.
	Water is overflowed.
OC	•	Restart after spinning.
	•	If the information code remains on the display, contact a local
		Samsung service centre.
	Check the drain hose.
	• Make sure the end of the drain hose is placed on the floor.
	• Make sure the drain hose is not clogged.
	• If the information code remains, contact a customer service
LC, LC1		centre.
		NOTE
		When the washer displays the “LC,LC1” code, the washer do
		draining for 3 minutes. During this time, the Power button is
		inoperative.
	Check the fan motor.
FC	•	Power off and power the machine on after 2-3 minutes, and
		then try again.
	Spinning does not work.
	• Make sure laundry is spread out evenly.
	• Make sure the washing machine is on a flat, stable surface.
UB	•	Redistribute the load. If only one item of clothing needs
		washing, such as a bathrobe or pair of jeans, the final spin
		result might be unsatisfactory, and an “UB” check message will
		be shown in the display.
	Check the motor for operation.
3C	• Try restarting the cycle.
	•	If the information code remains, contact a customer service
		centre.
	Check the pulsator motor for operation.
3CP	• Try restarting the cycle.
	•	If the information code remains, contact a customer service
		centre.
		English	63

Troubleshooting

WD90N642OOW_03924J-00_EN.indd 63

2018/2/23 13:35:52