DUST-FULL INDICATOR 
If the
NOTE: If the
ASSEMBLING THE VACUUM-CLEANER SO THAT IT IS READY FOR USE 
➀ ➁ | ➂ | ➃ |
1.Slide the free end of the extension wand into the nozzle tube.
2.Slide the narrow end of one extension wand into the other extension wand.
3.Slide the extension wand into the handle end of the hose.
4.Slide the hose clamp into the suction inlet of the unit.
*Option ➀Assemble the CYCLONIC FILTER with the handle and extension wand(depending on model).
➁Ajusting the telescopic tubes (depending on model).
*OPTION ➀ |
*OPTION ➁ |
EXTENDING : Holding narrow side of the telescopic tube with a hand, pull the hadle to the oppo- site side of it with another hand.
SHORTENING : Push the handle to the narrow side
of the tube, hoding 
it with another 
hand. 
POWER CORD 
1) PULLING OUT
The long power cord can be drawn out for your convenience.
2)REWINDING
After disconnecting the plug from the electri- cal outlet, press the cord rewind button lightly with your toe. The cord will automatically rewind.
CORD REWIND
NOTE:
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
ON/OFF SWITCH 
You can start or stop your vacuum cleaner by pressing the on/off switch lightly with your toe.
ON/OFF SWITCH
3