JVC DLA-M4000LU

* This projector is equipped with a microcomputer that may operate abnormally due to interference from external components.

If this happens, turn off the main power and disconnect the power cord from the wall AC outlet. Then reconnect the pow er cord

to AC outlet and turn on the main power again.

(For the turning on and off the power, see pages 25)

Symptom Probable cause Corrective action Page

Lens shift adjustment

is not possible. • Remove the shift center lock pin, and

then make adjustments. (For how to

remove the shift center lock pin,

consult the dealer where you

purchased the projector or a local

service center.)

• Is the shift center lock pin for shipment

left attached?

• Match the polarities of batteries

correctly (+ to + and - to -).

• Replace with new batteries.

• Use the remote control unit at a nearer

point.

• Remove any shielding objects.

Remote control unit

does not work.

• Are batteries exhausted?

• Are batteries installed correctly?

• Is there a shielding object between the

remote control unit and the remote

sensor?

• Is the distance too long?

• Is the remote control's LENS

LOCKÔUNLOCK switch set to LOCK? •Set the remote control's LENS

LOCKÔUNLOCK switch to UNLOCK?

––––

■ When the emergency indicator starts blinking:

Refer to the CAUTION and NOTES on page 24.

Troubleshooting (Cont.)

M4000LU p.61-63 00.10.3, 11:07 AM63