JVC DLA-M4000LU manual Changing the Color System, Press the MENU/ENTER button

• The main menu is shown on the screen.

Operating the Main Menu (Cont.)

Changing the Color System

■Remote control unit

QUICK
ALIGN.	OPERATE
	AV HIDE
PRESET	PAGE BACK	PAGE BACK button
LENS LOCK
	N
	M
	E
	N
	U
	/
UNLOCK	E
	T
	E
	R	MENU/ENTER button

AV RGB/COMPUTER

U T +

SHIFT ZOOM FOCUS

D W –

LENS

AUTO is set for the color system when the projector is shipped from the factory. Normally, use it in AUTO. If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input.

1 Press the MENU/ENTER button.

2 Press MENU/ENTER toward the 5or ∞ mark to select “DECODER”.

•The selected item (displayed in text) is shown in magenta color on the screen.

3 Press MENU/ENTER toward the 2 or 3 mark to set.

•Each time you press MENU/ENTER toward the 2 or 3 mark, the color system changes as follows:

3 : Forward / 2 : Backward

AUTO	Normally, set to AUTO. The color
	system of a signal being input is
	automatically identified.
NTSC(480i)	Dedicated to NTSC(480i).

■ Main menu

	C H : 1
Y P B P R	H D T V ( 1 0 8 0 i )

P I X E L C L O C K

P O S I T I O N

P I C T U R E

O P T I O N S

S O U R C E

C H A N N E L

U S E R S O U R C E S E T U P

D I S P L A Y S I Z E

D E C O D E R	N T S C ( 4 8 0 i )
L A N G U A G E	E N G L I S H

Color system (DECODER) display

Note

•When computer-related signal is input, the display of the color system is changed to gray color, making operation impossible. When video signals from AV devices are input, the item for the color system can be set.

NTSC4.43 Dedicated to NTSC4.43.

PAL	Dedicated to PAL.
SECAM	Dedicated to SECAM.

Memo

About automatic signal identification

•AUTO is selected when shipped from the factory. In AUTO, the color system (DECODER) of the signal being input is automatically identified and indicated in ( ). Refer to the main menu display.

•If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input. When the dedicated color system is set, be careful as automatic identification does not work.

■To finish the main menu, press the PAGE BACK button.

34