25
Basic Operations
Projector’s buttons
Remote control unit
OPERATE button
MAIN POWER switch
Projector’s indicator
2, 1
1, 2
Remote control unit Projector
or
Example of the projector’s button Projector
Projector
OPERATE button
2, 1
1. Turning on the Power
STAND BY indicator
OPERATE indicator
* Do not turn off the MAIN POWER switch during cool
down mode (the STAND BY indicator blinking). About
10 minutes after the STAND BY indicator comes on
steady (stand-by mode), the cooling fans (except the
one for the light-source lamp power supply) will stop,
and then turn off the MAIN POWER switch.
\
STAND BY OPERATE LAMP
EMERGENCY AV RGB
TEMP
STAND BY
OPERATE
OPERATE
OPERATE
STAND BY
STAND BY
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN. AV HIDEOPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
The following describes the basic procedure for normal use of
the projector.
1Turn on the MAIN POWER switch
of the projector.
ON [ ]:The main power turns on and the STAND BY
indicator comes on.
2Press the OPERATE button for one
second or more.
(Or press the remote control’s
OPERATE button for one second
or more.)
The OPERATE indicator comes on.
• About 30 seconds after the MAIN POWER switch is
turned on, you can start projecting.
Note
After the power is turned on, the screen may be jumbled for a few
seconds, but this is not a malfunction.
Turning off the Power
1Press the OPERATE button for one
second or more.
(Or press the remote control’s
OPERATE button for one second
or more.)
The STAND BY indicator changes to blinking, and the
projector goes into cool-down mode.
2Turn off the MAIN POWER switch
after the cooling fans have
stopped running.
OFF [
]: The MAIN POWER switch turns off and the
STAND BY indicator goes off.
M4000LU p.25-32 00.10.3, 11:03 AM25