6 CLEANING THE INLET FILTER
1
23
NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor.
7 OUTLET FILTER
1 | 2 | 3 |
- IF YOU HAVE A PROBLEM
PROBLEM | CAUSE | REMEDY | |
Motor does not start. | No power supply. | Check cable, plug and socket. | |
Thermal | Leave to cool. | ||
| |||
|
|
| |
Suction force is gradually | Nozzle, suction hose or | Remove the object and empty/ | |
decreasing. | tube is blocked. | wash cassette filter as required. | |
|
|
| |
Cord does not rewind fully. | Check that the cord is not | Pull the cord out | |
twisted or wound unevenly. | down the cord rewind button. | ||
| |||
|
|
| |
Vacuum cleaner does not | Crack or hole in hose. | Check hose and replace if | |
pick up dirt. | required. | ||
| |||
|
|
|
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC