Step, SC01 | Elation Professional CMY Zoom 575 instruction

CMY Zoom 575™

STEP

- With this function you can program the number of steps in your individual Program.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed, press ENTER.

3.Tap the UP button until “STEP” is displayed, press ENTER.

4.The display shows “S-01”, this indicates the first step of your program. You can call up to 48 scenes in “Run.” For example; if “S-05” is displayed, it means that the scene will “RUN” the first 5 scenes you saved in “Edit.”

5.Press ENTER to save and MODE/ESC to exit.

SC01

- This function allows you to choose the total number of scenes in your internal program.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed, press ENTER.

3.Tap the UP button until “SC01” is displayed.

4.The display indicates “SC01,” this stands for the first scene of your program. You may recall up to 48 scenes. For example, if you choose “SC05,” and then select the “Run” function, the first 5 scenes you saved in “Edit” mode will run.

5.Press ENTER to save and MODE/ESC to exit.

Editing procedure 1: Using the control board only.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed and press ENTER.

3.The display will show “SC-01”, this stands for the scene number. For example, “SC-01” is displayed, it means you will be editing scene 1, press ENTER. You can change the scene number by tapping the UP button.

4.Press ENTER, the display will show “C-01,” this represents the channel number. If “C-01” is displayed, you will be editing the fixture’s channel 1 value of the selected scene, press ENTER. You can change the channel number by tapping the UP button.

CMY Zoom 575™