EdgeStar AP12005ECO owner manual Installing the Carbon Filter

Page 6

Installing the Carbon Filter

Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from the air. It is recommended you replace the carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter periodically. Follow the steps below to install the carbon filter:

CAUTION: Never operate the air conditioner without the pre-filter attached.

1. Pull the handle on the pre-filter straight up.

Carbon filter

Pre-filter

Pegs

2.Place the activated carbon filter on the pre-filter.

3.Secure the carbon filter to the pegs on the filter frame.

4.Insert the assembled pre-filter into the back of the unit.

3

Image 6

Contents AP12005ECO Important Safety Information Electrical SafetyTable of Contents Introduction For Your RecordsParts Identification Front View Back ViewInstalling the Carbon Filter Window Kit Installation Instructions Preparations for installing the window kitInstalling the grated adapter Installing the window plates Attaching the duct connectors to the exhaust hose Connecting the duct connector to the unit Connecting the duct connector to the grated adapterDraining the Unit Direct drainageRemote Control Overview Button FunctionRemote Control LCD Indicators IndicatorsCooling Mode Operating the Remote ControlPower Dehumidifying ModeFan Speed Fan Only ModeAutomatic Mode ClockFront Panel Lights TimerFront Panel Lights and Controls Front Panel ControlsEnergy Saving Guide Cleaning the pre-filter MaintenanceCleaning the unit Preparation for StorageTroubleshooting Issue Possible Cause SolutionTroubleshooting Specifications EdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor