NOTES: Be careful not drop the remote control. Do not place the remote control in a location exposed to direct sunlight.
Using the Remote Control
The remote control can be used instead of the control panel to remotely operate your portable air conditioner. The functions on the remote are the same as on the control panel.
Up Button
Power Button
Mode Button 
Fan Speed Button
Swing Button | Timer On Button |
| Sleep Button |
Reset Button | Timer Off Button |
| Lock Button |
| LED Display Button |
| Button | Function |
|
| On/Off | Powers the unit on or off. |
|
| Mode | Changes between auto, cool, dehumidify and fan modes. |
|
| Speed | Sets the fan speed between low, medium, high, or auto. |
|
| Timer On | Used to enable the On timer and set the timed hours. |
|
| Timer Off | Used to enable the Off timer and set the timed hours. |
|
| Temp Up | Increases the set temperature by 2 degree increments |
|
| Temp Down | Decreases the set temperature by 2 degree increments |
|
| Swing | *Not an option on this model |
|
| Economy | Enables the Sleep mode |
|
| Reset | Used to cancel all controller settings |
|
| Lock | Used to lock all controller settings and prevent settings from |
|
|
| changing |
|
| LED | Used to light the display |
|
|
|
|
|
|
|
|
|
Installing the batteries
1)Remove the cover on the back of the remote control.
2)Insert the batteries with the (+) and
3)Slide the cover back on.
CAUTION: Use only AAA batteries. Remove the batteries if the remote control will not be used for one month or longer. Do not attempt to recharge batteries not designed to be recharged. All batteries should be replaced at the same time. Do not mix old and new batteries. Do not dispose of batteries in a fire as they may explode.
13