Draining the Unit
The unit will need to be drained if set to dehumidify mode. When the portable air conditioner is in cooling mode, it will remove moisture from the air. The condensed water from the air will be collected in an internal reservoir and will be evaporated and exhausted out of the exhaust hose. However, in very humid conditions, the internal reservoir may fill completely. This causes the air conditioner to turn off to avoid overflowing the internal reservoir. The unit will beep 8 times and the LCD will show a “P1” error code on the Control Panel if the reservoir is full of water. The fan motor will continue to run, but the air conditioner/ dehumidifier will stop running.
Direct drainage
For continuous use you can connect a drain hose to the upper drain port of the portable air conditioner.
1. Remove the rubber drain plug from the upper drain port.
2.Connect a drain hose to the upper drain port. (Some models may have a threaded valve for a garden hose. You may need to purchase an adapter.) The portable air conditioner will now drain through the drain hose. Please note that this unit has no drain pump; all water will drain with gravity only, i.e., only “downhill.”
Manual Drain
You may need to manually drain the unit if your unit stops running and displays a “P1” error.
1.Roll the unit to a location suitable for draining.
2.Remove the lower drain plug and allow the unit to drain completely.
3. Insert the lower drain plug to the lower drain port and restart the unit.
9