EdgeStar AP10001B owner manual Installing the Carbon Filter

Page 6

Installing the Carbon Filter

CAUTION: Never operate the air conditioner without the pre-filter attached.

Your EdgeStar portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from the air. It is recommended you replace the carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter periodically. Follow the steps below to install the carbon filter:

1. Pull the pre-filter straight up.

Filter frame
	Activated
Pre-filter	carbon filter
Pre-filter

Note: The size of the carbon filter may vary.

2. Separate the filter frame from the pre-filter.

3. Place the activated carbon filter on the pre-filter.

4. Reattach the filter frame.

5. Insert the assembled pre-filter into the back of the unit.

3

Image 6

Contents AP10001B Important Safety Information Electrical SafetyGeneral Safety Table of Contents Introduction First Time Operating InstructionsFor Your Records Parts Identification Front ViewBack View Installing the Carbon Filter Window Kit Installation Instructions Preparations for installing the window kitInstalling the window plates Attaching the oval adapter to the exhaust hose Connecting the exhaust hose to the unit Connecting the oval adapter to the window kitPage Draining the Unit Direct drainageManual Drain Control Panel Overview FunctionAutomatic Mode PowerCooling Mode Fan Only ModeLED Display Timer ButtonFan Button Sleep ButtonUsing the Remote Control Installing the batteriesButton Function Maintenance Normal SoundsEnergy Saving Guide Cleaning the unit Cleaning the pre-filtersPreparation for Storage Troubleshooting Issue Possible Cause SolutionTroubleshooting Issue Possible Cause SolutionSpecifications EdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor