Audio-Technica ATH-ANC9 Using your headphones, To activate noise-cancellationwithout audio

Using your headphones

To activate noise-cancellation without audio

•To activate noise-cancelling function, move the Power Switch on your headphones to the ON position. The power indicator will light, indicating the mode the headphones were last used in: Blue for Mode 1 (AIRPLANE); Red for Mode 2 (OFFICE); Green for Mode 3 (STUDY).

•Select a noise-cancellation mode by pressing the Mode Select Button. You will hear a beep as you change modes: One beep = Mode 1 (AIRPLANE); Two beeps = Mode 2 (OFFICE); three beeps = Mode 3 (STUDY). Headphones turn on in mode last used.

Note: For noise-cancelling without audio, there is no need to connect the headphone cable. Simply turn on the headphones, select a mode, and wear them.

To listen to music/audio

Note: There are two 1.2 meter cables included with your headphones. One cable has an inline controller/microphone; the other does not.

1.Minimize the volume of your sound device, then connect the included headphone cable to the port on the left earcup, making certain the plug is firmly seated.

2.Connect the other end of the headphone cable to the headphone jack of your audio device.

•Use 3.5 mm (1/8") stereo mini-plug to connect to your smartphone, MP3, CD player, DVD player, computer, or other audio devices equipped with a 3.5 mm output jack.

•Use included 6.3 mm (1/4") stereo adapter to connect to home stereo equipped with 6.3 mm (1/4") output jack.

•Use included airline adapter to connect to typical airline audio systems.

Note: The headphones cannot be used with devices equipped with 2.5 mm earphone jacks. Please purchase an optional mono/stereo adapter for use with a mono device. (Without use of an adapter, the right channel is muted when headphones are connected to a mono device.)

3.Please make sure to position the earpads correctly. (Left / Right position and with the earpad covering the whole ear)

4.To activate noise-cancelling function, move the Power Switch on your headphones to the ON position. The power indicator will light, indicating the mode the headphones were last used in: Blue for Mode 1 (AIRPLANE); Red for Mode 2 (OFFICE); Green for Mode 3 (STUDY).

5.Select a noise-cancellation mode by pressing the Mode Select Button. You will hear a beep as you change modes: One beep = Mode 1 (AIRPLANE); Two beeps = Mode 2 (OFFICE); three beeps = Mode 3 (STUDY). Headphones turn on in mode last used.

6.Turn on your audio device, and adjust volume as necessary. Please also read instruction manual of audio device.

How to use inline control

Play music/
Pause music/	Click the control button once
Answer & end calls
Go to next track	Double-click the control button
Go to previous track	Triple-click the control button

6