6Emerge EMS Installer/User Guide
Mounting
Before you begin connecting to the source PC system and display units, it is advisable to mount the Emerge EMS units in place. There are a number of mounting possibilities for the transmitter and receiver units:
•On a horizontal surface using the supplied self adhesive feet,
•Mounted on a screw using the rear slot,
•Within the optional rack mount chassis,
•On inclined surfaces using self adhesive Velcro© strips (not supplied).
Using the supplied self adhesive feet
Apply the supplied
Figure 2.1: Applying the self adhesive rubber feet
Using the rear mounting slot
The slot at the rear of each unit allows it to be hung upon a fixed screw that protrudes from the mounting surface.
IMPORTANT: The internal circuit board is accessible through the mounting slot. Ensure that the mounting screw protrudes no further than 1⁄2” (12.5mm) into the unit casing - serious electrical damage will be caused if the screw makes contact with the internal circuitry.
|
| ) |
|
|
|
| .19" | (5mm |
|
|
|
0 |
|
|
|
| |
|
|
|
| .5mm) | |
|
|
|
| (9 | |
|
|
| .37" |
| |
|
| 0 |
|
| |
|
|
|
|
|
Figure 2.2: The rear mounting slot