12Emerge EMS Installer/User Guide
To Connect the Power Adaptor
NOTE: Please read and adhere to the electrical safety information given within the Safety Precautions section of this guide. In particular, do not use a
1. Locate the supplied power adaptor and attach its output connector to the socket
labeled PWR on the Emerge EMS transmitter.
Figure 2.9: Connecting the power adaptor to the transmitter unit
2. Insert the IEC connector of the supplied power cord into the corresponding socket of the power supply.
3.When all other connections have been made at the transmitter and receiver units, connect the other end of the power cord to a nearby
earthed mains socket.
Figure 2.10: Connecting the power adaptor to the power cord