Chapter 2: Installation | 15 |
|
|
To Connect the Power Adaptor
NOTE: Please read and adhere to the electrical safety information given within the Safety Precautions section of this guide. In particular, do not use a
1. Locate the supplied power adaptor and attach its output connector to the socket labeled PWR on the Emerge EMS receiver.
Figure 2.14: Connecting the power adaptor to the receiver unit
2. Insert the IEC connector of the supplied power cord into the corresponding socket of the power supply.
3.When all other connections have been made at the transmitter and receiver units, connect the other end of the power cord to a nearby earthed mains
socket.
Figure 2.15: Connecting the power adaptor to the power cord
