Weil-McLain 800062000-Brn-PO Rie BF5 Mounting the Burner to the Boiler, Electrical Connections

Page 6

MOUNTING THE BURNER TO THE BOILER

- Position the MOUNTING GASKET (2) be- tween the flat surface of the UNIVERSAL MOUNTING FLANGE (1) installed on the burner and the appliance.

-Line up the holes in the UNIVERSAL MOUNTING FLANGE with the STUDS

(3) on the appliance mounting plate and securely bolt the UNIVERSAL MOUNT- ING FLANGE to the plate.

To remove the burner from the boiler, re- verse the procedure.

GB

E9328

ELECTRICAL CONNECTIONS

It is advisable to leave the control box off the sub-base while com- pleting the electrical connection to the burner.

1)Wire access hole (Use BX electrical connector)

2)Earth ground conductor terminal (Green wire)

3)Hot conductor terminal (Black wire)

4)Neutral conductor terminal (White wire)

WARNING:

 

 

The hot (black) wire must be connected to the L terminal and the

 

neutral (white) wire must be connected to the N terminal or the

 

primary safety control will be damaged.

.

 

Do not connect wither wire to the terminal marked

D7954

Using the appropriate diagram below, make electrical connec- tions to burner.

All wiring must be done in accordance with existing electrical codes, both national and local.

When all electrical connections have been made, the control box may be put back in place on the sub-base.

WARNING: DO NOT activate burner until proper oil line connections have been made, or failure of the pump shaft seal may occur.

3398

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Riello 40 BF Installlation Precautions AIR for CombustionTable of Contents Package Contents List Serial Number IdentificationBurner Components Identification Technical Data SpecificationsBurner and Mounting Flange Dimensions Burner ComponentsMounting the Burner to the Boiler Electrical ConnectionsApplication Field Wiring Remote Sensing of Safety LockoutNozzle Placement INSTALLATION/REMOVAL of Drawer AssemblyElectrode Setting Turbulator SettingOIL Line Connections Single Line Gravity Feed SystemSingle Line SYSTEM-PIPE Lengths TWO Line Lift System Accessory package required Nptf NPT pipe adapterLine Lift SYSTEM-PIPE Lengths Setting the AIR Adjustment Plate Pump PurgeTWO Line Lift System Riello Burner SET UP Sheet Burner START-UP Cycle ~ 12sec 2min~ 5sec Trouble Shooting Chart 120 Vac No VoltageTypical Layout for BF Burner Intake AIR This Intake AIR Layout for Chimney Applications onlyExploded Spare Parts List BF5 Spare Parts ListBF3 BF3 BF5Burner START- UP Form Burner Start-up Info OILTechnical Support Hotline Riello

800061000-Brn-PO Rie BF5, 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5 specifications

The Weil-McLain 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5, and 800061000-Brn-PO Rie BF5 are part of the manufacturer’s premier line of residential and commercial heating solutions. Renowned for their durability, efficiency, and advanced engineering, these models are designed to meet the diverse heating demands of modern buildings.

One of the standout features of the Weil-McLain Rie BF5 series is their robust construction. These boilers are typically built with high-grade cast iron, which not only enhances their longevity but also ensures superior heat retention. This design allows the boilers to operate efficiently over extended periods, minimizing the need for repairs and replacements.

Efficiency is a critical factor in today’s heating systems, and the Weil-McLain BF5 series excels in this category. With energy-efficient ratings, they are designed to reduce energy consumption while maintaining optimal performance. This leads to lower utility bills for homeowners and businesses alike, contributing to overall cost savings.

The technology integrated into the Rie BF5 series also plays a pivotal role in their operation. Advanced combustion technology ensures clean, efficient burning of fuel. This results in lower emissions, making these units a more environmentally friendly choice. Additionally, the incorporation of modulating gas valves allows for precise control of the heating output, enhancing comfort levels while reducing energy wastage.

Another notable characteristic is the versatility of the BF5 series. They come in various output capacities, making them suitable for a wide range of heating applications, from small residential spaces to larger commercial environments. The compact design also facilitates easier installation, making it simpler for contractors to integrate them into existing systems.

Moreover, the Weil-McLain Rie BF5 series is equipped with user-friendly controls that provide homeowners and facility managers with the ability to monitor and adjust settings as needed. This feature not only enhances user convenience but also contributes to overall performance optimization.

In conclusion, the Weil-McLain 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5, and 800061000-Brn-PO Rie BF5 embody advanced heating technology, exceptional efficiency, and durable construction. These characteristics make them an excellent choice for those seeking reliable heating solutions that stand the test of time while being environmentally conscious. Whether for residential or commercial use, these boilers deliver consistent performance and comfort, making them a trusted option in the industry.
Top Page Image Contents