Weil-McLain 800061000-Brn-PO Rie BF5 INSTALLATION/REMOVAL of Drawer Assembly, Electrode Setting

Page 8

GB

INSTALLATION/REMOVAL OF DRAWER ASSEMBLY

Removal:

A)Remove the air pressure switch support

(6)from the front shield by the two retain- ing screws (7)

B)Loosen off oil delivery tube nut from pump.

C)Loosen SCREW (3), and then unplug CONTROL BOX (1) by carefully pulling it back and then up.

D)Remove the AIR TUBE COVER PLATE

(5)by loosening the retaining SCREW

(4)(Two SCREWS – Model BF5).

E)Loosen SCREW (2), and then slide the complete drawer assembly out of the combustion head as shown.

F)To insert drawer assembly, reverse the

procedure in items A to E above.

E9327

ELECTRODE SETTING

 

5/32” or 4 mm

mm5

IMPORTANT:

 

13/64”

 

 

 

These dimensions must be observed and verified.

 

 

 

 

D6003

5/32” to 13/64” or 4 to 5 mm

 

 

 

 

NOZZLE PLACEMENT

-Remove the NOZZLE ADAPTER (2) from the DRAWER ASSEMBLY by loosening the SCREW (1).

-Insert the proper NOZZLE into the NOZZLE ADAPTER and tighten securely (Do not over tighten).

-Replace adapter, with nozzle installed, into drawer assem- bly and secure with screw (1).

IMPORTANT:

The nozzle and the pump pressure must be in accordance with the burner setup chart at page 9.

TURBULATOR SETTING

A)Loosen NUT (1), and then turn SCREW (2) until the INDEX MARKER (3) is aligned with the correct index number as per the burner setup chart at page 9.

B)Retighten the RETAINING NUT (1).

MODEL BF3: Zero and three are scale indicators only.

From left to right the first line is 3 and the last line 0.

MODEL BF5: Same as above, except scale indicators are 0

and 4.

D7520

 

S7459

3

2

1

3398

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Riello 40 BF Installlation Precautions AIR for CombustionTable of Contents Package Contents List Serial Number IdentificationTechnical Data Specifications Burner and Mounting Flange DimensionsBurner Components Identification Burner ComponentsMounting the Burner to the Boiler Electrical ConnectionsApplication Field Wiring Remote Sensing of Safety LockoutINSTALLATION/REMOVAL of Drawer Assembly Electrode SettingNozzle Placement Turbulator SettingSingle Line SYSTEM-PIPE Lengths OIL Line ConnectionsSingle Line Gravity Feed System Line Lift SYSTEM-PIPE Lengths TWO Line Lift System Accessory package requiredNptf NPT pipe adapter TWO Line Lift System Setting the AIR Adjustment PlatePump Purge Riello Burner SET UP Sheet ~ 5sec Burner START-UP Cycle~ 12sec 2min Trouble Shooting Chart 120 Vac No VoltageTypical Layout for BF Burner Intake AIR This Intake AIR Layout for Chimney Applications onlyExploded Spare Parts List Spare Parts List BF3BF5 BF3 BF5Burner START- UP Form Burner Start-up Info OILTechnical Support Hotline Riello

800061000-Brn-PO Rie BF5, 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5 specifications

The Weil-McLain 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5, and 800061000-Brn-PO Rie BF5 are part of the manufacturer’s premier line of residential and commercial heating solutions. Renowned for their durability, efficiency, and advanced engineering, these models are designed to meet the diverse heating demands of modern buildings.

One of the standout features of the Weil-McLain Rie BF5 series is their robust construction. These boilers are typically built with high-grade cast iron, which not only enhances their longevity but also ensures superior heat retention. This design allows the boilers to operate efficiently over extended periods, minimizing the need for repairs and replacements.

Efficiency is a critical factor in today’s heating systems, and the Weil-McLain BF5 series excels in this category. With energy-efficient ratings, they are designed to reduce energy consumption while maintaining optimal performance. This leads to lower utility bills for homeowners and businesses alike, contributing to overall cost savings.

The technology integrated into the Rie BF5 series also plays a pivotal role in their operation. Advanced combustion technology ensures clean, efficient burning of fuel. This results in lower emissions, making these units a more environmentally friendly choice. Additionally, the incorporation of modulating gas valves allows for precise control of the heating output, enhancing comfort levels while reducing energy wastage.

Another notable characteristic is the versatility of the BF5 series. They come in various output capacities, making them suitable for a wide range of heating applications, from small residential spaces to larger commercial environments. The compact design also facilitates easier installation, making it simpler for contractors to integrate them into existing systems.

Moreover, the Weil-McLain Rie BF5 series is equipped with user-friendly controls that provide homeowners and facility managers with the ability to monitor and adjust settings as needed. This feature not only enhances user convenience but also contributes to overall performance optimization.

In conclusion, the Weil-McLain 800060000-Brn-PO Rie BF5, 800062000-Brn-PO Rie BF5, and 800061000-Brn-PO Rie BF5 embody advanced heating technology, exceptional efficiency, and durable construction. These characteristics make them an excellent choice for those seeking reliable heating solutions that stand the test of time while being environmentally conscious. Whether for residential or commercial use, these boilers deliver consistent performance and comfort, making them a trusted option in the industry.
Top Page Image Contents