Description
—Remote Control—
Insert Remote Batteries
PREPARATION
POWER button
TUNER / BAND button SLEEP button
REPEAT button
CANCEL button
OPEN/CLOSE button
AUX, USB button
SUBTITLE button
Number(0~9) buttons
RESERVE button
Play/Pause button 
Stop button
1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.
2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and
3 Replace the battery cover.
VOLUME button
DSP/EQ button
MENU button
RETURN button
SEARCH SONG button
KEY CONTROL button
TEMPO button
FEMALE / MALE button
NTSC/PAL, LOGO COPY button REPEAT A↔B button
MELODY, STEP button
REMAIN button
Tuning Preset/CD Skip button TUNING button
TUNER MEMORY, P.SCAN button
INFO button
MUTE button
Cursor/Enter button
FAVORITE SONG button
SLOW, MO/ST button
AUDIO button
TIMER ON/OFF button
TIMER/CLOCK button
ZOOM button
EZ VIEW button
DEMO/DIMMER button
Caution Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and
•Use the correct type of batteries.Batteries that look similar may differ in voltage.
•Always replace both batteries at the same time.
•Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
7 | 8 |