Heath Zenith 5718 Wire the Light Control, Mount the Light Control, Black to Black, White to White

Page 3

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

Remove the existing light fixture.

Install the mounting strap as shown using two screws that fit your junction box.

The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

Route the light control’s wires through the large gasket holes.

Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

Mount the Light Control

Align the light control cover plate and cover plate gasket. Secure with the mounting bolt.

Align the three slots in the decorative shell with the lamp holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

Shell Slot

Push the rubber plug firmly into place.

If a wet location junction box was not used, caulk

 

the wall plate mounting surface with silicone

Black to Black

Mounting Strap

White to White

Rubber

Plug

weather sealant.

To avoid water damage and electrical shock, keep lamp holders 30° below horizontal.

Mounting

Bolt

Gasket

Junction box ground wire to green ground screw on fixture.

 

Keep lamps at least

 

1" (25 mm) from the

Lock Nut

sensor.Do not allow

the lamps to block

 

Lens

the lens.

Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting. When screwing in the floodlamps, do not overtighten.

598-1308-02

Image 3
Contents Features OperationRequirements DualBrite Timer Lamp ModesWall Mount Eave Mount Black to Black Wire the Light ControlJunction box ground wire to green ground screw on fixture Mount the Light ControlSecure the sensor head by tightening the clamp screw Test and AdjustmentTurn on the circuit breaker and light switch Avoid aiming the control atTroubleshooting Guide SpecificationsNo Service Parts Available for this Product Technical ServiceRequisitos FuncionamientoDualBrite CaracterísticasMontaje en pared Montaje en alero InstalacionLuz de Adorno DualBrite Fases de LámparaNegro a Negro Conecte el Control de LuzInstale el Control de Luz Advertencia Desconecte la energía en el disyuntorPrueba Y Ajuste Prenda el cortacircuitos y el interruptor de luzEvite apuntar el control hacia Guia DE Investigacion DE Averias EspecificacionesNo hay piezas de servicio disponibles para este producto Servicio TécnicoFonctionnement CaractéristiquesExigences Minuterie DualBriteMD InstallationRésumé du mode de commutation Montage mural Avant-toitNoir / Noir Blanc /Blanc Bride de montage Montage de la Commande D’éclairageEssais ET Réglages Éviter de pointer l’appareilSur de grands objets clairs à proximité qui réflé Guide DE Dépannage Fiche TechniqueAucune pièce de rechange n’est disponible pour ce produit Service Technique598-1308-02 Date of Purchase

5718 specifications

Heath Zenith 5718 is a remarkable product that stands out in the world of outdoor lighting solutions. This versatile motion-activated security light is designed not only to enhance safety but also to elevate the aesthetic appeal of residential exteriors. With its thoughtful engineering, the Heath Zenith 5718 incorporates advanced technologies and key features that make it a top choice for homeowners.

One of the key characteristics of the Heath Zenith 5718 is its powerful motion sensor capability. It utilizes passive infrared technology to detect movement within a specified range. The sensor can cover an area of up to 180 degrees and has a detection range of approximately 30 feet. This ensures that the light activates when it senses any movement, providing an immediate response to potential intruders.

In terms of lighting performance, the Heath Zenith 5718 boasts a bright LED light source that offers ample illumination to enhance visibility in outdoor spaces. The LED bulbs are energy-efficient, providing a long lifespan and consuming significantly less power compared to traditional incandescent bulbs. This not only reduces energy costs but also contributes to environmental sustainability.

The device is equipped with adjustable settings, allowing users to customize the duration of the light activation after motion is detected. Users can choose from different time settings, ranging from 10 seconds to 10 minutes. This flexibility provides the convenience of ensuring the light remains on for the desired length of time based on individual needs.

Installation is straightforward, thanks to its user-friendly design and included mounting hardware. The Heath Zenith 5718 is weather-resistant, ensuring it can withstand various outdoor elements like rain and snow, making it ideal for year-round use.

Additionally, the sleek and modern design of the light fixture allows it to seamlessly blend into different architectural styles, enhancing the visual appeal of any home. Available in neutral colors, it ensures that it complements rather than detracts from your home’s curb appeal.

In summary, the Heath Zenith 5718 is not just a security light; it is a reliable and efficient solution for outdoor illumination. With its motion detection capabilities, energy-efficient LED lighting, adjustable settings, and durable design, it is a smart investment for enhancing home security while adding a touch of elegance to outdoor spaces.