Heath Zenith 5718 manual Specifications, Troubleshooting Guide

Page 5

SPECIFICATIONS

Range . . . . . . . Up to 70 ft. (21 m); 100 ft. (30.5m)withRangeBoost. [varies with surrounding temperature]

Sensing Angle. . . . Up to 270°

Electrical Load. . . . Up to 300 Watt Maximum In- candescent [Up to 150 Watt maximum each lamp holder]

OR

Up to 60 Watt Maximum PAR SBCFL [Up to 30Watt maximum each lamp holder].

Power Requirements. 120 VAC, 60 Hz

Operating Modes. . . TEST, AUTO and MANUAL

MODE

Lamp Modes. . . . Normal, Soft, Flash Time Delay . . . . . 1, 5, 20 minutes DualBrite® Timer. . . 3, 6 hours, Dusk-to-Dawn

HeathCo LLC reserves the right to discontinue prod- ucts and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

TROUBLESHOOTING GUIDE

SYMPTOM

POSSIBLE CAUSE

 

 

 

Lights will not come on.

1.

Light switch is turned off.

 

2.

Flood light is loose or burned out.

 

3.

Fuse is blown or circuit breaker is turned off.

 

4.

Daylight turn-off is in effect (recheck after dark).

 

5.

Incorrect circuit wiring, if this is a new installation.

 

6.

Re-aim the sensor to cover desired area.

 

 

Lights come on in daylight.

1. Light control may be installed in a relatively dark location.

 

2.

Light control is in Test. (Set control switch to an ON-TIME position).

 

 

Lights come on for no ap-

1. Light control may be sensing small animals or automobile traffic (re-aim sensor).

parent reason.

2. Range is set too high. (Reduce Range).

 

3.

DualBrite® Timer is on.

Lights turn off too late in

1. Sensor is in a relatively dark location. (Relocate sensor, or use 3 hr or 6 hr setting.)

Dusk-to-Dawn setting

 

 

 

 

 

Lights stay on

1.

A flood lamp is positioned too close to the sensor or pointed at nearby objects that

continuously.

 

cause heat to trigger the sensor. (Reposition the lamp away from the sensor or nearby

 

 

objects).

 

2.

Light control is pointed toward a heat source like an air vent, dryer vent, or brightly-painted

 

 

heat-reflective surface. (Reposition sensor. Reduce Range).

 

3.

Light control is in Manual Mode. (Switch to Auto.)

 

 

Lights flash on and off.

1. Heat or light from the lamps may be turning the Light control on and off. (Reposition

 

 

the lamps away from the sensor).

 

2.

Heat being reflected from other objects may be affecting the sensor. (Reposition sen-

 

 

sor).

 

3.

Light control is in the Test mode and warming up. (Flashing is normal under these

 

 

conditions. Turn Boost off.)

 

4.

Light may be leaking through the floodlamp reflectors. (Replace the lamps with new high

 

 

quality PAR 38 lamps or make sure the metal lamp protectors are installed).

 

5.

Light control is in Flash mode. (Flashing is normal in this mode. Select Normal or Soft

 

 

mode to turn flash mode off).

 

 

Lights flash once, then stay

1. Sensor is detecting its own lights. (Reposition lamps to keep area below the sensor

off in Manual Mode.

 

relatively dark.)

 

 

 

598-1308-02

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Requirements FeaturesOperation Wall Mount Eave Mount DualBrite TimerLamp Modes Junction box ground wire to green ground screw on fixture Wire the Light ControlMount the Light Control Black to BlackTurn on the circuit breaker and light switch Test and AdjustmentAvoid aiming the control at Secure the sensor head by tightening the clamp screwTroubleshooting Guide SpecificationsNo Service Parts Available for this Product Technical ServiceDualBrite FuncionamientoCaracterísticas RequisitosLuz de Adorno DualBrite InstalacionFases de Lámpara Montaje en pared Montaje en aleroInstale el Control de Luz Conecte el Control de LuzAdvertencia Desconecte la energía en el disyuntor Negro a NegroEvite apuntar el control hacia Prueba Y AjustePrenda el cortacircuitos y el interruptor de luz Guia DE Investigacion DE Averias EspecificacionesNo hay piezas de servicio disponibles para este producto Servicio TécnicoExigences FonctionnementCaractéristiques Résumé du mode de commutation InstallationMontage mural Avant-toit Minuterie DualBriteMDNoir / Noir Blanc /Blanc Bride de montage Montage de la Commande D’éclairageSur de grands objets clairs à proximité qui réflé Essais ET RéglagesÉviter de pointer l’appareil Guide DE Dépannage Fiche TechniqueAucune pièce de rechange n’est disponible pour ce produit Service Technique598-1308-02 Date of Purchase

5718 specifications

Heath Zenith 5718 is a remarkable product that stands out in the world of outdoor lighting solutions. This versatile motion-activated security light is designed not only to enhance safety but also to elevate the aesthetic appeal of residential exteriors. With its thoughtful engineering, the Heath Zenith 5718 incorporates advanced technologies and key features that make it a top choice for homeowners.

One of the key characteristics of the Heath Zenith 5718 is its powerful motion sensor capability. It utilizes passive infrared technology to detect movement within a specified range. The sensor can cover an area of up to 180 degrees and has a detection range of approximately 30 feet. This ensures that the light activates when it senses any movement, providing an immediate response to potential intruders.

In terms of lighting performance, the Heath Zenith 5718 boasts a bright LED light source that offers ample illumination to enhance visibility in outdoor spaces. The LED bulbs are energy-efficient, providing a long lifespan and consuming significantly less power compared to traditional incandescent bulbs. This not only reduces energy costs but also contributes to environmental sustainability.

The device is equipped with adjustable settings, allowing users to customize the duration of the light activation after motion is detected. Users can choose from different time settings, ranging from 10 seconds to 10 minutes. This flexibility provides the convenience of ensuring the light remains on for the desired length of time based on individual needs.

Installation is straightforward, thanks to its user-friendly design and included mounting hardware. The Heath Zenith 5718 is weather-resistant, ensuring it can withstand various outdoor elements like rain and snow, making it ideal for year-round use.

Additionally, the sleek and modern design of the light fixture allows it to seamlessly blend into different architectural styles, enhancing the visual appeal of any home. Available in neutral colors, it ensures that it complements rather than detracts from your home’s curb appeal.

In summary, the Heath Zenith 5718 is not just a security light; it is a reliable and efficient solution for outdoor illumination. With its motion detection capabilities, energy-efficient LED lighting, adjustable settings, and durable design, it is a smart investment for enhancing home security while adding a touch of elegance to outdoor spaces.
Top Page Image Contents