Heath Zenith 5718 manual Test and Adjustment, Turn on the circuit breaker and light switch

Page 4
Motion
Most Sensitive
Clamp
Screw
Ball
Joint
Aim Sensor
Down for Short
Coverage
Aim Sensor
Higher for Long
Coverage

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on, wait 1 1/2 minutes.

NOTE: Meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes and when used with 120 W Max bulbs.

Turn the RANGE control to the medium position (halfway between MIN and MAX), DualBrite® to OFF, and the ON-TIME control to the TEST position.

LAMP MODE

NORMAL SOFT FLASH

 

 

 

 

 

ON-TIME

DUAL BRITE™

MIN

 

 

 

MAX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEST 1 5 20

OFF 3 6 DUSK TO

RANGE

 

 

 

MINUTES

 

HOUR DAWN

Bottom of Sensor

Avoid aiming the control at:

Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

Areas where pets or unwanted traffic may trigger the control.

Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

270°

8 ft.

(2.4 m)

70 ft. 100 ft.

(21 m) (30.5 m) Boosted

Maximum Range

Maximum

 

Coverage Angle

NOTE: If fixture is mounted higher than 8 ft.(2.4 m), aiming the sensor down will reduce coverage distance.

The detector is less sensitive to motion directly towards it.

Motion

Sensor

Least Sensitive

Loosen the clamp screw in the sensor ball joint and gently rotate the sensor.

Walk through the coverage area noting where you are when the lights turn on (also, the LED will flash several times when motion is detected).Move the sensor head up, down, or sideways to change the cover- age area. Keep the sensor at least 1" (25 mm) away from the lamps.

Adjust the RANGE as needed.

RANGE set too high may increase false triggering.

Secure the sensor head by tightening the clamp screw.

Do not overtighten the screw.

Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 20 minutes).

Set the DualBrite® switch to the amount of time after dusk you want the lights on at low level (Off, 3, 6 Hrs., Dusk-to-Dawn).

Set the LAMP MODE switch to the desired light turn-on effect (Normal, Soft, Flash).

WARNING - Risk of fire. Do not aim the lamps at a combustible surface within 3 ft. (1 m).

598-1308-02

Image 4
Contents Operation FeaturesRequirements Lamp Modes DualBrite TimerWall Mount Eave Mount Wire the Light Control Junction box ground wire to green ground screw on fixtureMount the Light Control Black to BlackTest and Adjustment Turn on the circuit breaker and light switchAvoid aiming the control at Secure the sensor head by tightening the clamp screwSpecifications Troubleshooting GuideTechnical Service No Service Parts Available for this ProductFuncionamiento DualBriteCaracterísticas RequisitosInstalacion Luz de Adorno DualBriteFases de Lámpara Montaje en pared Montaje en aleroConecte el Control de Luz Instale el Control de LuzAdvertencia Desconecte la energía en el disyuntor Negro a NegroPrenda el cortacircuitos y el interruptor de luz Prueba Y AjusteEvite apuntar el control hacia Especificaciones Guia DE Investigacion DE AveriasServicio Técnico No hay piezas de servicio disponibles para este productoCaractéristiques FonctionnementExigences Installation Résumé du mode de commutationMontage mural Avant-toit Minuterie DualBriteMDMontage de la Commande D’éclairage Noir / Noir Blanc /Blanc Bride de montageÉviter de pointer l’appareil Essais ET RéglagesSur de grands objets clairs à proximité qui réflé Fiche Technique Guide DE DépannageService Technique Aucune pièce de rechange n’est disponible pour ce produit598-1308-02 Date of Purchase

5718 specifications

Heath Zenith 5718 is a remarkable product that stands out in the world of outdoor lighting solutions. This versatile motion-activated security light is designed not only to enhance safety but also to elevate the aesthetic appeal of residential exteriors. With its thoughtful engineering, the Heath Zenith 5718 incorporates advanced technologies and key features that make it a top choice for homeowners.

One of the key characteristics of the Heath Zenith 5718 is its powerful motion sensor capability. It utilizes passive infrared technology to detect movement within a specified range. The sensor can cover an area of up to 180 degrees and has a detection range of approximately 30 feet. This ensures that the light activates when it senses any movement, providing an immediate response to potential intruders.

In terms of lighting performance, the Heath Zenith 5718 boasts a bright LED light source that offers ample illumination to enhance visibility in outdoor spaces. The LED bulbs are energy-efficient, providing a long lifespan and consuming significantly less power compared to traditional incandescent bulbs. This not only reduces energy costs but also contributes to environmental sustainability.

The device is equipped with adjustable settings, allowing users to customize the duration of the light activation after motion is detected. Users can choose from different time settings, ranging from 10 seconds to 10 minutes. This flexibility provides the convenience of ensuring the light remains on for the desired length of time based on individual needs.

Installation is straightforward, thanks to its user-friendly design and included mounting hardware. The Heath Zenith 5718 is weather-resistant, ensuring it can withstand various outdoor elements like rain and snow, making it ideal for year-round use.

Additionally, the sleek and modern design of the light fixture allows it to seamlessly blend into different architectural styles, enhancing the visual appeal of any home. Available in neutral colors, it ensures that it complements rather than detracts from your home’s curb appeal.

In summary, the Heath Zenith 5718 is not just a security light; it is a reliable and efficient solution for outdoor illumination. With its motion detection capabilities, energy-efficient LED lighting, adjustable settings, and durable design, it is a smart investment for enhancing home security while adding a touch of elegance to outdoor spaces.