Samsung VCC8170H3B/SBW, VCC8431V3R/XSB manual Change the BATTERYOptional, Cleaning the Inlet Filter

6 CLEANING THE FILTER

6-1 CLEANING THE INLET FILTER

①➁➂

6-2 CLEANING THE OUTLET FILTER

①➁➂

7 CHANGE THE BATTERY(Optional)

1) BATTERY TYPE : AA Size

NOTE

When the vacuum cleaner does not operate, replace the batteries.

If the problem persists, please contact our authorized dealer.

1. Never disassemble or recharge the batteries.		3. Do not reverse (+),(-) terminals.
WARNING 2. Never heat up the batteries or throw them into fire. 4. Dispose the batteries properly.
- IF YOU HAVE A PROBLEM
PROBLEM	CAUSE	REMEDY 0
Motor does not start.	No power supply.	Check cable, plug and socket.
	Thermal cut-out.	Leave to cool.
Suction force is gradually	Nozzle, suction hose or tube	Check for blockage and
decreasing.	is blocked.	remove.
Cord does not rewind fully.	Check that the cord is not	Pull the cord out 2-3m and
	twisted or wound unevenly.	push down the cord rewind
		button.
Vacuum cleaner does not	Crack or hole in hose.	Check hose and replace if
pick up dirt.		required.
Low or decreasing suction	Filter is full with dust.	Please check filter and, if
		required, clean as illustrated
		in the instructions.
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC

EN-8 EN-9