Samsung VC07F50HU1U/SB, VC15F50VNVR/SB, VC15F50HUYU/SB Change the battery, Operating the Cleaner

HOSE (SC15F50U, SC21F50U Series)

1. ON/OFF [ ] Button

-Press the [ ] button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

2. [SUCTION (-/+)] Button

-Press the [SUCTION (-/+)] button to increase or decrease the suction power. Each time you press the button, you gradually increase the suction power. After the suction power reaches its maximum, the next time you press the button, you return the suction power to its minimum.

sender

Handle Control

The cleaner is controlled by radio

frequency signals.

02

3. [BRUSH ON/OFF] Button

-Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off.

In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

Change the battery

• When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer.

• Use 2 batteries of size AAA.

1. Never disassemble or recharge the batteries. CAUTION 2. Never heat up the batteries or throw them into fi re.

3. Do not reverse (+), (-) poles.

4. Dispose of the batteries property.

BATTERY TYPE : AAA Size

OPERATING THE CLEANER

BODY
Press the power ON/OFF button repeatedly to start and to stop
the vacuum cleaner. (OFF → ON → OFF)	1

If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine.

2

⃞

The ON/OFF button operates the vacuum cleanner or stops it.

⃞

The fi lter light is illuminated when the dust pack requires checking or emptying.

operating the cleaner _09