DeLonghi WE 130, WE 110 manual Tips for Correct USE, AIR Purifying Filters, Close doors and windows

Page 16

TIPS FOR CORRECT USE

To ensure optimal results from your air conditio- ner, follow these recommendations:

close the windows and doors in the room to be air conditioned (fig. 33).

When installing the air conditioner semi-per- manently, you should leave a door slightly open (as little as 0.39 inch. (1 cm)) to gua- rantee proper ventilation.

33

close doors and windows

Protect the room from direct exposure to the sun by partially closing curtains and/or blin- ds to make the appliance much more econo- mical to run (fig. 34);

34

35

do not cover the appliance

make sure the air conditioner is standing on a level surface.

If necessary, place the castor locks under the front wheels.

AIR PURIFYING FILTERS

This appliance is fitted with two dust filters to maintain efficiency.

One is at the back near the intake grille, the other is at the side (fig. 36-37).

36

close curtains

never rest objects of any kind on the air con- ditioner;

do not obstruct the air intake and outlet (fig. 35). Leave both grilles free;

make sure there are no heat sources in the room;

never use the appliance in very damp rooms

(laundry rooms for example);

never use the appliance outdoors;

37

16

Image 16
Contents Climatizador Portátil 115V~60Hz 1500WP O R T a N T S a F E G U a R D S What is the WATER-AIR Pinguino During the summer, you feel comfortable at aDescription Preparing for USE Air-conditioning without installationProvided to hold the two parts of the win- dow together fig Air-conditioning with installation Window pane Wooden kickboard of a French windowPreparing for Operation in WA- TER Mode Setting water hardnessOnce the appliance has been installed, it is ready for use When the water in the tank runs out,Turn the appliance off and unplug it from the outlet Replacing the limescale filterLay the appliance on its back as shown in figure Operating from the Control Panel Turning the appliance onDehumidifying mode fig Air conditioning mode figFan mode fig Smart mode fig To set this modeDescription of the Remote CON- Trol Choose the required fan speedUsing the Remote Control Setting the timeInserting or replacing the batteries Time is reachedBoost function fig Selecting the temperature scale figSleep function fig Programming start up Programming the TimerProgramming shutdown SELF-DIAGNOSIS Frost preventionAIR Purifying Filters Tips for Correct USEClose doors and windows Cleaning Start of Season Operations END of Season OperationsEmptying the tank Emptying the internal tankGuarantee Technical CharacteristicsLimit conditions Troubleshooting If repairs become necessary, see contact information below Please contact our toll free hotline at