Multistage Cooking |
| Fast Preheating the Oven |
Your microwave oven can be programmed to cook food in up to three stages (the Convection , Microwave+Convection and Fast Preheat mode can not be used in Multistage cooking). Example: You wish to Power defrost food and cook it without having to reset the oven after each stage. You can thus defrost and cook a 1.8 kg chicken in three stages:
• Defrosting
• Microwave cooking for 30 minutes
• Grill for 15 minutes
Defrosting must be the first stage. Combination and Grill can only be used once during the remaining two stages, However microwave can be used twice(at two different power levels).
1. Press the Power Defrost ( 
) button.
2. Select the type of food that you are cooking by pressing the Power Defrost ( 
) button.
3. Set the weight by turning the dial knob the appropriate number of times (1800 g in the example).
4.Press the Microwave ( 
) button.
5.Set the microwave power level by pressing the Microwave
( 
) button to select the appropriate Power Level (450W in the example).
6. Set the cooking time by turning the dial knob. (30 minutes in the example)
7.Press the Grill ( 
) button.
8. Set the cooking time by turning the dial knob. (15 minutes in the example).
9.Press Start( 
) button.
Result: Cooking starts:
When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.
For convection cooking, it is recommended that you preheat the oven to | EN | |||
the appropriate temperature before placing the food in the oven. |
| |||
When the oven reaches the requested temperature, it is maintained for |
| |||
approximately 10 minutes; it is then switched off automatically. |
| |||
Check that the heating element is in the correct position for type of |
| |||
cooking that you require. |
|
| ||
|
| 1. Press the Fast Preheat ( | ) button. |
|
|
|
| ||
|
| Result: The following indications are displayed: |
| |
|
| |||
|
| |||
|
| 250°C (temperature) |
| |
|
|
|
|
|
2.Press the Fast Preheat ( 
) button one or more times to
set the temperature.
3.Press the Start( 
) button.
Result: The oven is preheated to the requested temperature.
The display times are 8 seconds for the selected cooking mode and 2 seconds for the preset temperature in sequence.
Ex) In fast preheat mode at 200°C
(displayed for 8 seconds) | (displayed for 2 seconds) |
Upon arrival at the preset temperature, the oven beeps 6 times and the temperature is kept for 10 minutes.
After 10 minutes, the beeps 4 times and the operation stops.
In case the inner temperature has reached the preset temperature, the beeps 6 times when temperature and the preset temperature is kept for 10 minutes.
If you would like to know the current temperature of oven cavity, press Fast Preheat ( 
) button.
13