Samsung DMS790BUB/XEE manual Loading of regenerating salt, Regenerating salt indicator

Loading of regenerating salt

Loading of regenerating salt

Filling with salt is essential for providing a good wash without marks. It regenerates the resins that soften the water, by removing its lime content (unless the mains water supply is soft enough). Refer to “Setting the water softener”.

Only use special dishwasher regenerating salt. Do not use table salt or any type of cooking salt, this could damage your appliance’s water softener.

1.Unscrew and remove the stopper on the salt tank.

2. Fill the tank with regenerating salt specially designed for dishwashers.

3.Use the funnel supplied with your dishwasher. The first

time, top up with water up to the rim of the tank.

SOFTENERWATERAND03DETERGENT

Regenerating salt indicator:

This illuminates when salt must be added.

After the tank has been filled with regenerating salt, the indicator light may remain lit until the salt has dissolved sufficiently, usually after one cycle (of if the tank has not been filled completely; for example, when first putting the machine into service using the sample).

This can be deactivated as indicated in the paragraph “For multi-purpose products” setting table.

If the salt overflows when filling the tank, to avoid oxidization of the tub it is advisable to remove the salt crystals or to run a Soaking programme.

using the detergent and water softener _13