Desa Tech CGD3018N, CGD3924N, CGD3930N installation manual Technical Service, Service Hints, Model

Page 27

TECHNICAL

SERVICE

SPECIFICATIONS

SERVICE

HINTS

You may have further questions about installation, operation, or troubleshooting. If so, contact DESA International’s Technical Service Department at 1-800-DESA LOG (1-800-337-2564).

 

18" Model

24" Model

30" Model

Btu (Variable)

16,000/30,000

20,000/39,000

20,000/39,0000

Type Gas

Natural Gas Only

Natural Gas Only

Natural Gas Only

Ignition

Piezo

Piezo

Piezo

Manifold Pressure

3.5" W.C.

3.5" W.C.

3.5" W.C.

Inlet Gas

 

 

 

Pressure (in. of water)

 

 

 

Maximum

10.5"

10.5"

10.5"

Minimum*

5"

 

 

Shipping Weight

28 lbs.

30 lbs.

32 lbs.

* For the purpose of input adjustment

When gas pressure is too low

pilot will not stay lit

burners will have delayed ignition

heater will not produce specified heat

When gas quality is bad

pilot will not stay lit

burners will produce flames and soot

heater will backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact your local natural gas supplier.

102986

27

Image 27
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualContents Safety Information Burner patterns can cause sooting Piezo Ignition System Local Codes Unpacking Product FeaturesSafety Device OperationAIR for VentilationProviding Adequate Ventilation AIR for Combustion and Ventilation Determining AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Outdoors Ventilation AIRTion and ventilation air by one of the methods described Ventilation Air From Inside BuildingCheck GAS Type InstallingMinimum Fireplace Clearance LOG Sizing RequirementsMinimum Wall and Ceiling Clearances see Figure Minimum Non Combustible Material Clearances Log Set Installing Minimum Non Combustible Material ClearancesFloor Clearances Attaching Damper Clamp Installing Damper Clamp Accessory for Vented OperationInstallation Items Needed Installing Heater Base AssemblyMounting Bracket Connecting to GAS Supply Gas Connection Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig Pressure Testing Heater Gas ConnectionsInstalling Logs InstallingOperating Heater Operating HeaterPilot Flame Pattern Operating Heater Inspecting BurnersODS/PILOT and Burner CleaningMaintenance Trouble ShootingTROUBLE- Shooting Maintenance,Refer to Air for Com Gas leak. See Warning Technical Service Service HintsModel Parts Under Warranty Parts Not Under WarrantyParts Central Hood GA6052 AccessoriesValve GA5010 Hood GA6050Illustrated Parts Breakdown CGD3018N CGD3924N CGD3930N Parts ListKeep this Warranty Warranty Information