Desa Tech CGN30TL Technical Service, Service Hints Service Publications, 20,000 Btu/Hr Models

Page 26

TECHNICAL

SERVICE

SPECIFICATIONS

SERVICE

HINTS

SERVICE PUBLICATIONS

You may have further questions about installation, operation, or troubleshooting.

If so, contact DESA International’s Technical Service Department at 1-800-323-5190.

 

CGN20T/CGN20TL

CGN30T/CGN30TL

 

20,000 Btu/Hr Models

30,000 Btu/Hr Models

Btu (Variable)

10,000/20,000

15,000/30,000

Type Gas

Natural Only

Natural Only

Ignition

Piezo

Piezo

Pressure Regulator Setting

3" W.C.

3" W.C.

Inlet Gas Pressure (in. of water)

 

Maximum

10.5"

10.5"

Minimum

4"

4"

Dimensions, Inches (H x W x D)

 

Heater

23.5 x 18.5 x 8.0

23.5 x 25.9 x 8.0

Carton

25.8 x 21.3 x 10.1

25.8 x 28.7 x 10.1

Weight (pounds)

 

 

Heater

22

30

Shipping

27

35

When gas pressure is too low

pilot will not stay lit

burner will have delayed ignition

heater will not produce specified heat

When gas quality is bad

pilot will not stay lit

burner will produce flames and soot

heater will backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact your local natural gas supplier.

You can purchase a service manual from the address listed on the back page of this manual. Send a check for $5.00 payable to DESA International.

26

103873

Image 26
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety InformationIf you smell gas Product Identification Local Codes Unpacking Product FeaturesSafety Device Piezo Ignition SystemProviding Adequate Ventilation Fresh AIR ForVentilation Determining if You Have a Confined or Unconfined Space Fresh AIRDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Inside Building Fresh AIR for Combustion and VentilationVentilation AIR Ventilation Air From Outdoors Ventilation Air from OutdoorsCheck GAS Type Installing to WallInstallation Items Locating HeaterAttaching Thermostat Sensing Bulb Thermostat Sensing BulbLocating Thermostat Sensing Bulb Bracket Greater clearances from floor and joining wall Marking Screw LocationsMaintain minimum clearances shown in . If you can, provide Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply Supply ConnectingTo GAS Checking GASPressure Testing Heater GAS Connections CheckingFor Your Safety Read Before Lighting Operating HeaterOperating Heater Shutting Off Heater Shutting Off Burner Only pilot stays litInspecting Burner Pilot Flame PatternBurner Flame Pattern Correct Burner Flame PatternCabinet Trouble ShootingODS/PILOT and Burner Cleaning and Mainte TroubleIng and Maintenance TROUBLE- ShootingDo not try to light any appliance If you smell gasShut off gas supply Building20,000 Btu/Hr Models Technical ServiceService Hints Service Publications Parts Under Warranty Parts CentralsCGN20T CGN20TL CGN30T CGN30TL Parts List Description QTYAccessories Valve GA5010103873 Warranty Information Keep this Warranty