Desa B70D, R70D owner manual Replacement Parts, Technical Service, Pump Rotor, Parts Under Warranty

Page 10

70,000 Btu/Hr H.S.I. Series

PORTABLE FORCED AIR HEATERS

SERVICE

PROCEDURES

Continued

PUMP ROTOR

(Procedure if Rotor is Binding)

1.Remove upper shell (see page 7).

2.Remove filter end cover screws using 5/16" nut-driver.

3.Remove filter end cover and air filters.

4.Remove pump plate screws using 5/16" nut-driver.

5.Remove pump plate.

6.Remove rotor, insert, and blades.

7.Check for debris in pump. If debris is found, blow out with compressed air.

8.Install insert and rotor.

9.Check gap on rotor. Adjust to .003"/

.004" if needed (see Figure 17). Note: Rotate rotor one full turn to in- sure the gap is .003"/.004" at tightest position. Adjust if needed.

10.Install blades, pump plate, air filters, and filter end cover.

11.Replace fan guard and upper shell.

12.Adjust pump pressure (see page 7). Note: If rotor is still binding, proceed as follows.

13.Perform steps 1 through 6 above.

14.Place fine grade sandpaper (600 grit) on flat surface. Sand rotor lightly in “figure 8” motion four times (see Fig- ure 18).

15.Reinstall insert and rotor.

16.Perform steps 10 through 12 above.

Blade

Pump Plate

Air Intake Filter

Filter End

Cover

Insert

Rotor

Air Output

Filter

TOR

PFA/P 056

Fan Guard

Figure 16 - Rotor Location

Gap Adjusting Screw

Blade

.003"/.004" Gap Measured With Feeler Gauge

Rotor

Gap Adjusting Screw

Figure 17 - Gap Adjusting Screw Locations

Sandpaper

Figure 18 - Sanding Rotor

REPLACEMENT PARTS

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Techni- cal Service Dept. at 1-800-323-5190.

When calling DESA International, have ready:

•your name

•your address

•model number of your heater

•how heater was malfunctioning

•purchase date

Usually, we will ask you to return the defec- tive part to the factory.

PARTS NOT UNDER

WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Parts Department at 1-800-972-7879 for referral information. Parts Centrals are listed in the Authorized Service Center booklet supplied with heater.

When calling DESA International, have ready:

•model number of your heater

•the replacement part number

TECHNICAL

SERVICE

You may have further questions about op- eration or troubleshooting. If so, contact DESA International’s Technical Service Dept. at 1-800-323-5190.

You can also visit DESA International’s technical services web site at www.desatech.com.

10

103685

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Portable Forced AIR Heater Safety Information Portable Forced AIR HeatersProduct Identification Unpacking Theory of OperationTo Start Heater To Reset HeaterFuels Ventilation Operation To Stop HeaterHow Often How To Corrosive fumesTroubleshooting Fault Condition Possible Cause RemedyUpper Shell Removal Service ProceduresPump Pressure Adjustment FANFuel Filter Ignition Control AssemblyProcedure for Replacing Fuse IgnitorNozzle Assembly Fuel and AIR Line Replacement Proper RoutingParts Under Warranty Replacement PartsTechnical Service Parts not Under WarrantyAccessories SpecificationsWiring Diagram Ignition ControlIllustrated Parts Breakdown R70D B70DParts List Number Description QTYWarranty Service Limited WarrantyRepair Service

R70D, B70D specifications

Desa B70D and R70D are prominent models within the advanced range of digital printing solutions offered in the contemporary market. These printers are designed to meet the diverse requirements of businesses and individual users who demand high-quality prints with exceptional efficiency.

One of the main features of the Desa B70D is its impressive print resolution, which can reach up to 1200 x 1200 DPI. This high resolution ensures that every detail is captured crisp and clear, making it ideal for producing professional-grade documents, brochures, and marketing materials. The R70D model complements this with its enhanced color reproduction capabilities, allowing for vibrant prints that stand out in any setting.

Both models incorporate cutting-edge technology to streamline the printing process. They support automatic duplex printing, significantly reducing paper consumption and costs, as well as minimizing environmental impact. This feature is particularly beneficial for businesses looking to promote sustainability while maintaining productivity.

Another key characteristic of the Desa B70D and R70D is their robust and reliable performance. Equipped with high-capacity ink systems, these printers can handle large printing volumes with minimal maintenance. This efficiency translates to less downtime, making them suitable for environments where time and productivity are of the essence.

User-friendly interfaces are also a defining feature of these printers. They come with intuitive control panels and easy navigation systems, making them accessible even for those with limited technical expertise. Additionally, connectivity options such as Wi-Fi, Ethernet, and mobile printing capabilities ensure that users can print easily from various devices, enhancing workflow efficiency.

In conclusion, the Desa B70D and R70D represent advanced solutions in the digital printing landscape. Their combination of high-resolution output, sustainable features, and user-friendly functionality makes them an excellent choice for businesses and individuals alike. As technology continues to evolve, these models are well-equipped to meet the future demands of printing. Whether you require sharp text documents or vibrant visuals, these printers deliver performance that stands out in today’s competitive market. Their reliability and efficiency make them an invaluable asset to any printing operation, thereby establishing a strong foothold in the realm of digital printing technology.
Top Page Image Contents