Desa R70D, B70D owner manual Nozzle Assembly, Fuel and AIR Line Replacement Proper Routing

Page 9

OWNER’S MANUAL

SERVICE

PROCEDURES

Continued

NOZZLE ASSEMBLY

1.Remove upper shell (see page 7).

2.Remove fan (see page 7).

3.Remove fuel and air line hoses from nozzle assembly (see Figure 12).

4.Turn nozzle assembly 1/4 turn to left and pull toward motor to remove (see Figure 13).

5.Place plastic hex-body into vise and lightly tighten.

6.Carefully remove nozzle from the nozzle adapter using 5/8" socket wrench (see Figure 14).

7.Blow compressed air through face of nozzle. This will free any dirt in nozzle area.

8.Inspect nozzle seal for damage.

9.Replace nozzle into nozzle adapter un- til nozzle seats. Tighten 1/3 turn more using 5/8" socket wrench (40-45 inch- pounds).

10.Attach nozzle assembly to burner strap.

11.Attach and route fuel and airline hoses to nozzle assembly as shown (see Fig- ure 12). Route photo cell wires as shown in Figure 12.

12.Replace fan (see page 7).

13.Replace fan guard and upper shell.

Combustion

Chamber

Burner

Strap

Nozzle/

Adapter

Assembly

 

Fuel Line

Air Line

Hose

 

Hose

Photocell

 

Wires

Figure 12 - Removing Air and Fuel Line Hoses

Combustion

Chamber

Nozzle/

Adapter

Assembly

Figure 13 - Removing Nozzle/Adapter Assembly

Nozzle

Face

Nozzle

Seal

Nozzle

Nozzle

Adapter

Air Line

Fitting Fuel Line

Fitting

Figure 14 - Nozzle and Nozzle Adapter

FUEL AND AIR LINE

REPLACEMENT AND

PROPER ROUTING

1.Remove upper shell (see Upper Shell Removal, page 7).

2.Remove side cover screws using 5/16" nut driver (see Figure 8, page 8).

3.Remove side cover.

4.Inspect fuel and air line hoses for cracks and/or holes. If fuel line hose is damaged, disconnect from nozzle adapter (see Fig- ure 12) and from fuel filter (see Fuel Fil- ter, page 8). If air line hose is damaged, disconnect from nozzle adapter (see Fig- ure 12) and from barb fitting on pump end cover (see Figure 15).

5.Install new air and/or fuel line. Attach one end of air line hose to barb fitting on pump end cover (see Figure 15) and the other end to nozzle adapter (see Figure 12). Attach one end of fuel line hose to fuel filter (see Fuel Filter, page 8) and the other end to nozzle adapter (see Figure 12). Route air and fuel line approximately as shown in Figure 12.

Note: Route hoses as shown in Figure

12. Hoses are not to touch photocell bracket.

6.Replace side cover.

7.Replace upper shell and fan guard (see Upper Shell Removal, page 7).

Pump End Cover

Barb Fitting

Air Hose

Figure 15 - Air Hose to Barb FItting

Continued

103685

9

Image 9
Contents Portable Forced AIR Heater Portable Forced AIR Heaters Safety InformationTheory of Operation Product Identification UnpackingFuels Ventilation Operation To Reset HeaterTo Start Heater To Stop HeaterCorrosive fumes How Often How ToFault Condition Possible Cause Remedy TroubleshootingPump Pressure Adjustment Service ProceduresUpper Shell Removal FANProcedure for Replacing Fuse Ignition Control AssemblyFuel Filter IgnitorFuel and AIR Line Replacement Proper Routing Nozzle AssemblyTechnical Service Replacement PartsParts Under Warranty Parts not Under WarrantyWiring Diagram SpecificationsAccessories Ignition ControlR70D B70D Illustrated Parts BreakdownNumber Description QTY Parts ListLimited Warranty Warranty ServiceRepair Service

R70D, B70D specifications

Desa B70D and R70D are prominent models within the advanced range of digital printing solutions offered in the contemporary market. These printers are designed to meet the diverse requirements of businesses and individual users who demand high-quality prints with exceptional efficiency.

One of the main features of the Desa B70D is its impressive print resolution, which can reach up to 1200 x 1200 DPI. This high resolution ensures that every detail is captured crisp and clear, making it ideal for producing professional-grade documents, brochures, and marketing materials. The R70D model complements this with its enhanced color reproduction capabilities, allowing for vibrant prints that stand out in any setting.

Both models incorporate cutting-edge technology to streamline the printing process. They support automatic duplex printing, significantly reducing paper consumption and costs, as well as minimizing environmental impact. This feature is particularly beneficial for businesses looking to promote sustainability while maintaining productivity.

Another key characteristic of the Desa B70D and R70D is their robust and reliable performance. Equipped with high-capacity ink systems, these printers can handle large printing volumes with minimal maintenance. This efficiency translates to less downtime, making them suitable for environments where time and productivity are of the essence.

User-friendly interfaces are also a defining feature of these printers. They come with intuitive control panels and easy navigation systems, making them accessible even for those with limited technical expertise. Additionally, connectivity options such as Wi-Fi, Ethernet, and mobile printing capabilities ensure that users can print easily from various devices, enhancing workflow efficiency.

In conclusion, the Desa B70D and R70D represent advanced solutions in the digital printing landscape. Their combination of high-resolution output, sustainable features, and user-friendly functionality makes them an excellent choice for businesses and individuals alike. As technology continues to evolve, these models are well-equipped to meet the future demands of printing. Whether you require sharp text documents or vibrant visuals, these printers deliver performance that stands out in today’s competitive market. Their reliability and efficiency make them an invaluable asset to any printing operation, thereby establishing a strong foothold in the realm of digital printing technology.