Desa B70D, R70D Fuel Filter, Ignition Control Assembly, Ignitor, Procedure for Replacing Fuse

Page 8

70,000 Btu/Hr H.S.I. Series

PORTABLE FORCED AIR HEATERS

SERVICE PROCEDURES

Continued

WARNING: Never service heater while it is plugged in, op- erating, or hot. Severe burns and electrical shock can occur.

FUEL FILTER

6.Remove combustion chamber. Stand combustion chamber on end with nozzle adapter bracket on top (see Fig- ure 10).

7.Remove ignitor screw with a 1/4" nut driver. Carefully remove ignitor from nozzle adapter bracket.

CAUTION:Donotbendorstrike ignitor element. Handle with care.

Photocell Bracket

Ignitor Element

Ignitor Screw/

Washer

Assembly

Ignitor

Nozzle Adapter Bracket

1.Remove 4 side cover screws using 5/16" nut-driver.

2.Remove side cover.

3.Pull upper fuel line off fuel filter neck.

4.Carefully pry bushing and fuel filter out of fuel tank.

5.Wash fuel filter with clean fuel and re- place in tank.

6.Attach upper fuel line to fuel filter neck.

7.Replace side cover.

Fuel Filter

8.Carefully remove replacement ignitor from styrofoam packing.

9.Carefully guide ignitor into opening in nozzle adapter bracket. Do not strike ig- nitor element. Attach ignitor to nozzle adapter bracket with screw using a 1/4" nut driver (see Figure 10). Torque 8 to 15 in. lbs. Do not over torque.

10.Replace combustion chamber.

11.Route the ignitor wires back down through the hole in the lower shell. Connect wires to the ignition control assembly.

12.Replace side cover (see Figure 8).

13.Connect and route fuel line hose and air line hose to nozzle adapter (see Figure 9).

14.Replace photocell in photocell bracket. Route wires as shown in Figure 12, page 9.

15.Replace fan (see page 7).

16.Replace fan guard and upper shell (see page 7).

Combustion

Nozzle Adapter

Chamber

Bracket Opening

Figure 10 - Ignitor Replacement

IGNITION CONTROL

ASSEMBLY

(Procedure for Replacing Fuse)

WARNING: High Voltage

1.

Unplug heater

2.

Remove side cover screws (4) using

 

5/16" nut-driver to expose ignition con-

 

trol assembly.

3.

Remove fuse cover.

4.

Remove fuse from fuse clips.

5.

Replace fuse with fuse of the same type

 

and rating (GMA-10). Do not substi-

Side Cover

Upper Fuel Line

Figure 8 - Fuel Filter Removal

IGNITOR

1.

Remove upper shell and fan guard (see

 

page 7).

2.

Remove fan (see page 7).

3.

Remove 4 side cover screws with a

 

5/16" nut driver. Remove side cover

Combustion Chamber

Air Line

Hose

Fuel

Line

Hose

Nozzle Adapter Bracket

Ignitor

Ignitor

Wires

 

tute a fuse with a higher current rating.

6.

Replace fuse cover.

7.

Replace side cover.

Fuse

Fuse

Clips

Cover

 

 

Fuse

 

(see Figure 8).

4.

Disconnect ignitor wires (yellow) from

 

ignition control assembly (see Figure

 

9). Pull the ignitor wires up through the

 

hole in the lower shell.

5.

Disconnect fuel line hose and air line

 

hose. Remove photocell from photocell

 

bracket (see Figure 9).

Photocell

Ignition

Bracket

Control

 

Photocell

Assembly

 

Assembly

 

Side Cover

 

Figure 9 - Disconnecting Ignitor Wires from Ignition Control Assembly

Figure 11 - Replacing Fuse

8

103685

Image 8
Contents Portable Forced AIR Heater Safety Information Portable Forced AIR HeatersProduct Identification Unpacking Theory of OperationTo Reset Heater Fuels Ventilation OperationTo Start Heater To Stop HeaterHow Often How To Corrosive fumesTroubleshooting Fault Condition Possible Cause RemedyService Procedures Pump Pressure AdjustmentUpper Shell Removal FANIgnition Control Assembly Procedure for Replacing FuseFuel Filter IgnitorNozzle Assembly Fuel and AIR Line Replacement Proper RoutingReplacement Parts Technical ServiceParts Under Warranty Parts not Under WarrantySpecifications Wiring DiagramAccessories Ignition ControlIllustrated Parts Breakdown R70D B70DParts List Number Description QTYRepair Service Limited WarrantyWarranty Service

R70D, B70D specifications

Desa B70D and R70D are prominent models within the advanced range of digital printing solutions offered in the contemporary market. These printers are designed to meet the diverse requirements of businesses and individual users who demand high-quality prints with exceptional efficiency.

One of the main features of the Desa B70D is its impressive print resolution, which can reach up to 1200 x 1200 DPI. This high resolution ensures that every detail is captured crisp and clear, making it ideal for producing professional-grade documents, brochures, and marketing materials. The R70D model complements this with its enhanced color reproduction capabilities, allowing for vibrant prints that stand out in any setting.

Both models incorporate cutting-edge technology to streamline the printing process. They support automatic duplex printing, significantly reducing paper consumption and costs, as well as minimizing environmental impact. This feature is particularly beneficial for businesses looking to promote sustainability while maintaining productivity.

Another key characteristic of the Desa B70D and R70D is their robust and reliable performance. Equipped with high-capacity ink systems, these printers can handle large printing volumes with minimal maintenance. This efficiency translates to less downtime, making them suitable for environments where time and productivity are of the essence.

User-friendly interfaces are also a defining feature of these printers. They come with intuitive control panels and easy navigation systems, making them accessible even for those with limited technical expertise. Additionally, connectivity options such as Wi-Fi, Ethernet, and mobile printing capabilities ensure that users can print easily from various devices, enhancing workflow efficiency.

In conclusion, the Desa B70D and R70D represent advanced solutions in the digital printing landscape. Their combination of high-resolution output, sustainable features, and user-friendly functionality makes them an excellent choice for businesses and individuals alike. As technology continues to evolve, these models are well-equipped to meet the future demands of printing. Whether you require sharp text documents or vibrant visuals, these printers deliver performance that stands out in today’s competitive market. Their reliability and efficiency make them an invaluable asset to any printing operation, thereby establishing a strong foothold in the realm of digital printing technology.