Desa CGS2718N installation manual Connecting to GAS Supply

Page 16

INSTALLING

Continued

16

CONNECTING TO GAS SUPPLY

NOTICE

A qualified service person must connect heater to gas supply. Follow all local codes.

Installation Items Needed

Before installing heater, make sure you have the items listed below.

• piping (check local codes)

• sediment trap

•

sealant (resistant to propane/LP gas)

•

tee joint

•

manual shutoff valve *

•

pipe wrench

•test gauge connection *

*An A.G.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable alternative to test gauge connection. Purchase the optional A.G.A. design-certified manual shutoff valve from your dealer. See Accessories, page 29.

WARNING

Never connect heater to private (non-utility) gas wells. This gas is commonly known as well-head gas.

CAUTION

Use only new, black iron or steel pipe. Internally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of 1/2" diameter or greater to allow proper gas volume to heater. If pipe is too small, undue loss of pressure will occur.

Installation must include a manual shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be up- stream from heater (see Figure 13, page 17).

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged heater valves.

CAUTION

Use pipe joint sealant that is resistant to liquid petroleum (LP) gas.

Install sediment trap in supply line as shown in Figure 13, page 17. Locate sedi- ment trap where it is within reach for cleaning. Locate sediment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contami- nants. This keeps them from going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly.

102988

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Burner patterns can cause sooting Local Codes Unpacking Product Features Safety PilotOperation Piezo Ignition SystemVentilation AIR forProviding Adequate Ventilation Determining AIR Flow for Heater Location AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Installing Check GAS TypeLOG Sizing Requirements Minimum Fireplace ClearanceMinimum Wall and Ceiling Clearances see Figure Minimum Non Combustible Material Clearances Minimum clearances shown in when using hood Floor Clearances Installing Damper Clamp Accessory for Vented Operation Attaching Damper ClampInstalling Heater Base Assembly Installation Items NeededMounting Bracket Connecting to GAS Supply Checking GAS Connections Gas ConnectionPressure Testing Heater Gas Connections Test Pressures Equal To or Less Than 1/2 PsigInstalling For Your Safety Read Before Lighting Operating HeaterHeater OperatingInspecting Burners Pilot Flame PatternCleaning MaintenanceTrouble Shooting ODS/PILOT and BurnerMaintenance, TROUBLE- ShootingRefer to Air for Com Gas leak. See Warning Service Hints Technical ServiceModel Parts Not Under Warranty Parts Under WarrantyParts Central Accessories Valve GA5010Hood GA6050 Hood GA6052Illustrated Parts Breakdown Parts List CGS2718N CGS3124NWarranty Information Keep this Warranty

CGS2718N specifications

Desa CGS2718N is an innovative gas stove designed to enhance cooking efficiency and convenience in modern kitchens. This versatile appliance combines advanced technology with thoughtful design, catering to the needs of both amateur cooks and professional chefs.

One of the standout features of the CGS2718N is its powerful burners. Equipped with multiple high-efficiency burners, it ensures even heat distribution for optimal cooking results. The stove supports high-temperature cooking which is essential for tasks such as searing meats or achieving a perfect stir-fry. The burners also feature adjustable flame control, allowing users to customize heat levels with precision.

In terms of design, the CGS2718N boasts a sleek and modern aesthetic that fits seamlessly into various kitchen styles. The stainless steel surface is easy to clean and resistant to stains, ensuring that the stove maintains its elegant appearance over time. Its compact size makes it ideal for kitchens with limited space, while still providing ample cooking area.

Another notable characteristic of the CGS2718N is its safety features, which include flame failure devices that automatically shut off the gas supply if a flame is extinguished. This ensures peace of mind for families, especially in households with children or pets. Moreover, the stove is equipped with an ignition system that provides a reliable spark for easy, quick lighting without the need for matches.

The CGS2718N also includes a convenient stovetop configuration, allowing users to position pots and pans of different sizes easily. The grates are designed for stability, enhancing safety and usability. Additionally, the stove’s compatibility with various cooking methods makes it a versatile choice for any culinary enthusiast.

In conclusion, Desa CGS2718N combines high performance, user-friendly design, and safety features to meet the needs of today's cooks. Its advanced burner technology, combined with a stylish appearance and practical safety measures, positions it as a valuable addition to any kitchen. Whether for everyday meals or gourmet cooking, the Desa CGS2718N delivers exceptional results and a satisfying cooking experience.
Top Page Image Contents