Desa UNVENTED (VENT-FREE) NATURAL GAS LOG HEATER Installing Heater Base Assembly

Page 15

INSTALLING

Continued

INSTALLING HEATER BASE ASSEMBLY

WARNING

WARNING ICON

G 001

You must secure this heater to fireplace floor. If not, heater will move when you adjust controls. Moving heater may cause a gas leak.

WARNING

WARNING ICON

G 001

If installing in a sunken fireplace, special care is needed. You must raise the fireplace floor to allow access to heater control panel. This will insure adequate air flow and guard against soot- ing. Raise fireplace floor with non-combustible material. Make sure material is secure.

CAUTION

WARNING ICON

G 001

Do not pick up heater base assembly by the burner. This could damage heater. Only handle base assembly by grates.

IMPORTANT: Make sure the heater burner is level. If heater is not level, heater will not work properly.

Installation Items Needed

•hardware package (provided with heater)

•approved flexible gas hose (not provided) (if allowed by local codes)

•sealant (resistant to LP gas, not provided)

•electric drill with 3/16" drill bit (metal or masonry as applicable)

•flatheaded screwdriver

1.Apply pipe joint sealant lightly to male threads of the fitting to be threaded into gas regulator. Connect approved flexible gas hose to gas regulator of heater (see Figure 11, page 16).

IMPORTANT: Hold gas regulator with wrench when connecting flexible gas hose.

2.Locate two masonry screws in hardware package.

3.Position heater base assembly in fireplace.

4.Mark screw locations through one hole on each side of the mounting bracket (see Figure 12, page 16). If installing in a brick-bottom fireplace, mark screw locations in mortar joint of bricks.

5.Remove heater base from fireplace.

6.Drill holes at marked locations using 3/16" drill bit.

7.Attach base assembly to fireplace floor using two masonry screws (in hardware package).

8.Connect to gas supply. See Connecting To Gas Supply, page 16.

Continued

103309

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Oak Log Design OWNER’S Operation and Installation ManualFLAME-MAX What to do if YOU Smell GASContents Safety Information Information SafetyProduct Identification Product FeaturesLocal Codes UnpackingUnconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionDetermining if You Have a Confined or Unconfined Space Determining AIR Flow for Heater LocationVentilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Check GAS Type InstallingMinimum Wall and Ceiling Clearances see Figure Minimum Fireplace ClearanceTo Combustible Materials LOG Sizing RequirementsMinimum Non Combustible Material Clearances If Using Mantel Installing Attaching Damper Clamp Installing Damper Clamp Accessory for Vented OperationInstallation Items Needed Installing Heater Base AssemblyAttaching Flexible Gas Hose to Heater Gas Regulator Installation Items Needed Connecting to GAS SupplyGas Connection Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig Pressure Testing Heater Gas ConnectionsFor Standard Oak Log Model Installing LogsFor Premium Models Installing Premium One-Piece Log SetOperating Heater For Your Safety Read Before LightingVariable Control Operation Pilot Flame Pattern Operating Heater Inspecting BurnersLogs Trouble ShootingQualified service person should service and repair heater ODS/PILOT and BurnerTROUBLE- Shooting Maintenance,Refer to Air for Com Gas leak. See Warning Hints ServiceReplacement Parts TechnicalIllustrated Parts Breakdown KEY Part Number for VYS18N VYS24N Description QTY Parts ListBirch Log Models VYD24N and VYBD24N KEY Part Number for VYD24N VYBD24N Description QTY Hood GA6052 AccessoriesValve GA5010 Hood GA6050103309 Keep this Warranty Warranty Information

UNVENTED (VENT-FREE) NATURAL GAS LOG HEATER specifications

The Desa Unvented (Vent-Free) Natural Gas Log Heater is an innovative heating solution that combines efficiency, comfort, and aesthetic appeal. Designed for those seeking a reliable and stylish way to heat their living spaces, this vent-free heater is ideal for any home setting.

One of the main features of the Desa Unvented Gas Log Heater is its ability to provide warmth without the need for external venting. This means it can be installed in a variety of locations, including areas without a traditional chimney or flue. The absence of vents not only simplifies installation but also maximizes design flexibility, allowing homeowners to enhance their existing decor with a beautiful gas log fireplace.

The heater utilizes advanced infrared heating technology, which ensures that radiant heat is emitted throughout the room. This method of heating is exceptionally efficient, as it warms up objects and people directly, rather than merely heating the air. Consequently, this results in faster heating times and greater comfort, especially during colder months.

Equipped with the latest safety features, the Desa Unvented Gas Log Heater includes an oxygen depletion sensor (ODS), which automatically shuts off the heater if oxygen levels drop too low. This feature guarantees peace of mind for users, ensuring that safety is prioritized without sacrificing comfort.

Another significant characteristic of this heater is its realistic log design, which mimics the look of traditional wood-burning fireplaces. The ceramic fiber logs are intricately detailed, providing an authentic and charming ambiance that enhances any room's aesthetic. This realistic flame effect not only adds to the visual appeal but also creates a cozy atmosphere perfect for gatherings with family and friends.

The heater is designed to operate efficiently with minimal maintenance. The adjustable thermostat allows for precise temperature control, ensuring that users can set their desired warmth level and maintain it effortlessly. Moreover, the unit is compatible with natural gas, making it an environmentally friendly option that reduces the carbon footprint compared to traditional heating methods.

In summary, the Desa Unvented Natural Gas Log Heater is an exceptional heating option that combines elegance, safety, and performance. With its vent-free design, advanced heating technology, realistic aesthetics, and user-friendly features, this heater is a perfect choice for those looking to create a warm and inviting environment in their homes.
Top Page Image Contents