Desa UNVENTED (VENT-FREE) NATURAL GAS LOG HEATER Installing Logs, For Standard Oak Log Model

Page 20

20

INSTALLING

Continued

INSTALLING LOGS

WARNING

WARNING ICON

G 001

Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

For Standard Oak Log Model

Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

1.Locate pegs on the bottom of back log (#1). Slide these pegs into the holes in the grate base behind the burner (see Figure 16).

2.Locate the notches on the back of the front log (#2). Slide these notches over the tabs of the grate base (see Figure 17).

3.Locate the notches in the bottom of the crossover log (#3). Place the crossover log on top of the back log and front log. Make sure the notches of the crossover log line up with rectangular knobs on top of the back and front logs (see Figure 18).

4.Add lava rock around base of heater.

 

Back Log

 

 

(#1)

Front Log

Peg

 

(#2)

Hole

Notch

 

 

 

 

Peg

 

Tabs of

Grate Base

Figure 16 - Installing Back Log

Figure 17 - Installing Front Log

 

Crossover

 

Log (#3)

Notch

 

Notch

Rectangular Knob

 

Rectangular Knob

Figure 18 - Installing Crossover Log

103309

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OWNER’S Operation and Installation Manual FLAME-MAXWhat to do if YOU Smell GAS Oak Log DesignContents Safety Information Safety InformationProduct Identification Features Local CodesUnpacking ProductAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Unconfined SpaceDetermining AIR Flow for Heater Location Determining if You Have a Confined or Unconfined SpaceVentilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Installing Check GAS TypeMinimum Fireplace Clearance To Combustible MaterialsLOG Sizing Requirements Minimum Wall and Ceiling Clearances see FigureMinimum Non Combustible Material Clearances If Using Mantel Installing Installing Damper Clamp Accessory for Vented Operation Attaching Damper ClampInstalling Heater Base Assembly Installation Items NeededAttaching Flexible Gas Hose to Heater Gas Regulator Connecting to GAS Supply Installation Items NeededChecking GAS Connections Gas ConnectionPressure Testing Heater Gas Connections Test Pressures Equal To or Less Than 1/2 PsigInstalling Logs For Standard Oak Log ModelInstalling Premium One-Piece Log Set For Premium ModelsFor Your Safety Read Before Lighting Operating HeaterVariable Control Operation Operating Heater Inspecting Burners Pilot Flame PatternTrouble Shooting Qualified service person should service and repair heaterODS/PILOT and Burner LogsMaintenance, TROUBLE- ShootingRefer to Air for Com Gas leak. See Warning Service Replacement PartsTechnical HintsIllustrated Parts Breakdown Parts List KEY Part Number for VYS18N VYS24N Description QTYBirch Log Models VYD24N and VYBD24N KEY Part Number for VYD24N VYBD24N Description QTY Accessories Valve GA5010Hood GA6050 Hood GA6052103309 Warranty Information Keep this Warranty

UNVENTED (VENT-FREE) NATURAL GAS LOG HEATER specifications

The Desa Unvented (Vent-Free) Natural Gas Log Heater is an innovative heating solution that combines efficiency, comfort, and aesthetic appeal. Designed for those seeking a reliable and stylish way to heat their living spaces, this vent-free heater is ideal for any home setting.

One of the main features of the Desa Unvented Gas Log Heater is its ability to provide warmth without the need for external venting. This means it can be installed in a variety of locations, including areas without a traditional chimney or flue. The absence of vents not only simplifies installation but also maximizes design flexibility, allowing homeowners to enhance their existing decor with a beautiful gas log fireplace.

The heater utilizes advanced infrared heating technology, which ensures that radiant heat is emitted throughout the room. This method of heating is exceptionally efficient, as it warms up objects and people directly, rather than merely heating the air. Consequently, this results in faster heating times and greater comfort, especially during colder months.

Equipped with the latest safety features, the Desa Unvented Gas Log Heater includes an oxygen depletion sensor (ODS), which automatically shuts off the heater if oxygen levels drop too low. This feature guarantees peace of mind for users, ensuring that safety is prioritized without sacrificing comfort.

Another significant characteristic of this heater is its realistic log design, which mimics the look of traditional wood-burning fireplaces. The ceramic fiber logs are intricately detailed, providing an authentic and charming ambiance that enhances any room's aesthetic. This realistic flame effect not only adds to the visual appeal but also creates a cozy atmosphere perfect for gatherings with family and friends.

The heater is designed to operate efficiently with minimal maintenance. The adjustable thermostat allows for precise temperature control, ensuring that users can set their desired warmth level and maintain it effortlessly. Moreover, the unit is compatible with natural gas, making it an environmentally friendly option that reduces the carbon footprint compared to traditional heating methods.

In summary, the Desa Unvented Natural Gas Log Heater is an exceptional heating option that combines elegance, safety, and performance. With its vent-free design, advanced heating technology, realistic aesthetics, and user-friendly features, this heater is a perfect choice for those looking to create a warm and inviting environment in their homes.
Top Page Image Contents