Controls and Connections

8	7	5	4	2
				3
	9			6	1
R CHANNEL		SUB		L CHANNEL

CAUTION

ATTENTION: SHOCK HAZARD - DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR.

								NADY SYSTEMS, Inc.
								Emeryville, CA, USA
115V~/60Hz								Made in Taiwan
115V~/60Hz
230V~/50Hz	FUSE 0.5A/250V	HIGH	MID	LOW		HIGH	MID	LOW
			OUTPUT	INPUT	WOOFER		OUTPUT	INPUT

10	15	11
	14	12	13

1.ON/OFF SWITCH:

Caution: Always turn the Crossover ON before the amplifier, and turn it OFF after the amplifier or transients harmful to the speakers may result .

2.L/M/H OUTPUT LEVEL CONTROLS:

These are used to adjust the output level of each way : LOW, MID and HIGH .

3.LOW CUT SWITCHES FOR LOW WAY:

These insert low cut filters in the LOW way of each stereo channel with a 12dB/Octave, 30 Hz HPF to minimize problems from subsonic frequencies in the signal, to suppress hum, and to prevent low frequency speaker reso- nance.

4.MH CROSSOVER FREQUENCY CONTROLS:

These select the crossover frequencies of the MID and HIGH ways. They’re a low cut for the HIGH and a high cut for the MID. You can select the frequencies between 480 Hz to 7 kHz.

5.LH CROSSOVER FREQUENCY CONTROLS:

These select the crossover frequencies of the LOW and MID ways. They’re a low cut for the MID and a high cut for the LOW. You can select the frequency between 70 Hz to 1 kHz.

6.PHASE SWITCHES:

These allow switching the polarity to invert the signal phase on the MID and HIGH ways. This is done after the out- put levels are set to correct audible phase problems.

Caution: Before pressing the PHASE switches, always lower the outputs of your power amplifiers to avoid possible speaker damage.

7.SUB CROSSOVER FREQUENCY CONTROL:

This selects the crossover frequency of the SUB WOOFER way. You can select the frequency between 50 Hz to 250 Hz.

8.SUBWOOFER OUTPUT LEVEL CONTROL:

This is used to adjust the SUB WOOFER output level.

9.SUBWOOFER LOW CUT SWITCHES:

This inserts a low cut filter in the SUBWOOFER way with a 12dB/Octave, 30 Hz HPF to minimize problems from subsonic frequencies in the signal, to suppress hum, and to prevent low frequency subwoofer speaker resonance.

10.AC CORD

11.L/M/H OUTPUT CONNECTORS:

Connect to your amplifiers via these balanced XLR output jacks.

12.STEREO INPUT CONECTORS:

Connect your L/R stereo input signal to these balanced XLR input jacks.

13.SUBWOOFER OUTPUT CONECTOR:

Connect to your subwoofer amplifier via this balanced XLR output jack.

14.AC VOLTAGE SELECTOR SWITCH:

Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz).

15.FUSE COMPARTMENT :

Replace with only the same type fuse (0.5A/250V). If it blows continuously, do not use the unit until it has been serv- iced by qualified personnel.

CX-23SW specifications

The Nady Systems CX-23SW is a professional-grade wireless microphone system that stands out for its innovative features and reliable performance. Designed for various applications, including live performances, presentations, and broadcasting, the CX-23SW ensures that users deliver their message with clarity and precision.

One of the most notable features of the CX-23SW is its dual-channel operation. This allows users to connect two microphones simultaneously, making it an ideal choice for duets or interactive presentations. The system includes a diverse array of transmitter options, including handheld, bodypack, and lavalier microphones. This versatility provides users the flexibility to choose the configuration that best suits their specific needs.

The CX-23SW employs advanced UHF technology that provides a much wider frequency range, significantly enhancing sound quality and reducing potential interference. With 160 selectable frequencies, users can avoid crowded channels and ensure a stable, interference-free performance. This feature is particularly essential for users operating in environments where multiple wireless systems are in use, such as theaters or large events.

In addition to its robust operating frequency, the CX-23SW boasts extended range capabilities. It delivers a reliable signal over considerable distances, making it suitable for both indoor and outdoor settings. The long-range transmission is complemented by an innovative antenna design that helps maintain a consistent signal even in challenging environments.

Another key characteristic of the CX-23SW is its user-friendly interface. The system features a large LCD display on the receiver that provides comprehensive information, including battery status, channel selection, and signal strength. This ensures that users can easily monitor their system's performance and make quick adjustments when necessary.

The build quality of the Nady CX-23SW is also noteworthy. The system is designed to endure the rigors of professional use, with durable materials that can withstand wear and tear from frequent handling and transport. The battery life is another strong point, with extended use ensured through efficient power management, allowing performers to focus on their performance without worrying about frequent battery changes.

Overall, the Nady Systems CX-23SW wireless microphone system is a robust, versatile solution that caters to the needs of professionals across various fields. With its dual channel operation, extensive frequency selection, durable build, and user-friendly features, it stands out as a leading option for anyone looking to elevate their audio experience. Whether in a musical performance, conference, or broadcast, the CX-23SW is engineered to deliver top-notch sound quality and reliability.