Newcon Optik LAM 10M IR Operation Instructions, Installing the battery, Mounting LAM on a weapon

5.OPERATION INSTRUCTIONS

5.1. Installing the battery

LAM is powered by a standard Lithium CR123 3V battery. To install a battery:

-unscrew the battery compartment cap (15, Fig.1),

-insert a battery observing the polarity as marked on the battery compartment,

-check the condition of the O-ring on the body; replace it if worn or torn,

-screw the battery compartment cap back on.

5.2. Mounting LAM on a weapon

LAM is mounted on a Picatinny rail in the following order:

-loosen screw caps (13, Fig.1),

-align LAM on Picatinny rail,

-fasten the screw caps (13, Fig.1).

Note: The distance between the gas exit nozzles of the rifle and laser beam output window should be as long as possible so that the window would remain clean during shooting.

10