Newcon Optik LAM 10M IR operation manual To apply new layer of lubricant, Transportation

To apply new layer of lubricant:

-Within two hours from cleaning apply an even

0.2-0.5 mm thick layer of lubricant on metal surfaces with a brush.

-Do not cover plastic parts.

When preparing for a long-term storage LAM just received from manufacturer or from workshop, ensure that actual set is the same as indicated in the Delivery Set section of this manual.

Cases with LAMs should be placed on stands, shelves or in cupboards at dry heated and ventilated premises in accordance with Storage conditions as described in Specifications.

It is unacceptable to keep LAMs on the floor, near stoves or windows that let through direct sunrays.

Presence of acid and alkaline vapor, as well as of other aggressive admixtures in the air in the storage area may cause damage to LAM.

After 4 years of storage, it is necessary to perform thorough inspection of LAMs’ functionality.

6.3. Transportation

To prepare LAM for transportation:

-Turn LAM off by turning operating modes switch.

15