Newcon Optik LAM 10M IR operation manual Troubleshooting, Spot shape or size has changed

7.TROUBLESHOOTING

Spot shape or size has changed

Emitter objective lens is dirty. Flush emitter lens with fresh water and wipe it with soft cloth.

No radiation when activating LAM with remote switch

Turn the operating modes switch (17, Fig.1) to OFF position and then turn LAM ON again. If this doesn’t help, replace the remote switch.

Radiation doesn’t stop when remote switch is released

Replace the remote switch.

Moisture in the battery compartment.

Check the O-ring on the battery compartment cover and replace it if necessary.

Shift of zero line when firing

Tighten screw caps (13, Fig.1) on the Picatinny rail.

17