Setting a Standing Time
GB
The Hold Timer can be used to set a standing time automatically (without microwave cooking). You do not need to watch the clock; the oven will beep when the standing time is over.
1 Press the HOLD TIMER button.
2Select the standing time by pressing the 10 min, 1 min and 10 s buttons.
3Press START(
).
Result: The oven beeps when the standing time is over.
Multistage Cooking
Your microwave oven can be programmed to cook food in up to four stages.
Example: You wish to defrost food and cook it without having to reset the oven after each stage. You can thus defrost and cook a 1.8 kg chicken in four stages:
◆ Defrosting
◆ Standing for 1 minute
◆ Grill for 15 minutes
◆ Combined convection and microwave cooking at 200°C and 70% for 30 minutes
➢ The first two stages must be defrosting and a standing time. The combination, convection, and grill modes can only be used once each in the remaining two stages; microwaves can however be used twice at two different power levels. The convection tray should be used, when grill, convection, and combination cooking are required.
1 Press the AUTO DEFROST button and set the weight by pressing the 1 kg and 0.1 kg buttons the appropriate number of times (1.8 kg in the example).
2 Press HOLD TIMER and set the standing time by pressing the 1 min button the appropriate number of times (1 minute in the example).
3 Press GRILL and set the cooking time by pressing the 10min and 1min buttons the appropriate number of times (15 minutes in the example).
4 Set the convection temperature by pressing the MW+OVEN button the appropriate number of times (200°C in the example).
5Set the microwave power level by the pressing POWER LEVEL the appropriate number of times (70% in the example).
6Set the combined mode cooking time by pressing the 10 min and 1 min buttons (30 minutes in the example).
7Press START(
).
Result: Cooking starts and when it has finished:
◆The oven beeps four times
◆The current time is displayed again
21