Desa RN30BT To Turn OFF GAS to Appliance, Thermostat Control Operation, Manual Lighting Procedure

Page 15

OPERATING HEATER

Thermostat Model

Continued

TO TURN OFF GAS TO APPLIANCE

Shutting Off Heater

 

to the OFF position.

1.

Turn control knob clockwise

Clockwise

 

 

 

2.

Turn off all electric power to the appliance if service is to be performed.

Shutting Off Burner Only (pilot stays lit)

1.

Turn control knob clockwise Clockwise

to the PILOT position.

THERMOSTAT CONTROL OPERATION

(Thermostat Models Only)

The thermostatic control used on these models differs from standard thermostats. Standard thermostats simply turn on and off the burner. The thermostat used on this heater senses the room temperature. The thermostat adjusts the amount of gas flow to the burner. This increases or decreases the burner flame height. At times the room may exceed the set temperature. If so, the burner will shut off. The burner will cycle back on when room temperature drops below the set temperature.

The control knob can be set to any heat level between HI and LO.

Note: The thermostat sensing bulb measures the temperature of air near the heater cabinet. This may not always agree with room temperature (depending on housing construction, installation location, room size, open air temperatures, etc.). Frequent use of your heater will let you determine your own comfort levels.

MANUAL LIGHTING PROCEDURE

1.Remove front panel (see Figure 5, page 7).

2.Follow steps 1 through 5 under Lighting Instructions, pages 13 and 14.

3.With control knob pressed in, strike match. Hold match to pilot until pilot lights.

4.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

5.Replace front panel.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualContents Safety Information Safety Information Thermostatic Heat Control Thermostat Model Only Local Codes Unpacking Product FeaturesSafety Device Piezo Ignition SystemInstallation Items Check GAS TypeLocating Heater Thermostat Sensing Bulb Locating Thermostat Sensing BulbAttaching Thermostat Sensing Bulb Methods For Attaching Mounting Bracket To Wall Installing Heater to WallMounting Bracket Removing Front Panel Of HeaterAttaching Mounting Bracket To Wall Marking Screw LocationsPlacing Heater On Mounting Bracket Installing Bottom Mounting ScrewsConnecting to GAS Supply Checking GAS Connections ConnectingPressure Testing GAS Supply Piping System To GAS SupplyManual Shutoff Valve Pressure Testing Heater GAS ConnectionsFor Your Safety Read Before Lighting Operating HeaterLighting Instructions Pilot Manual Lighting Procedure To Turn OFF GAS to ApplianceThermostat Control Operation Non-Thermostat Models GRH/OV 007G Pilot Flame Pattern Inspecting BurnerBurner Flame Pattern Correct Flame Pattern AT High PositionIncorrect Flame Pattern AT High Position Cabinet Cleaning and Maintenance Trouble ShootingObserved Possible Problem Cause Remedy ODS/PILOT and BurnerTROUBLE- Shooting Cleaning and MainteFrom Observed Possible Problem Cause Ing statement atTop Parts Not Under Warranty Technical ServiceService Hints Replacement Parts Parts Under WarrantyFloor Mounting Stand GA4000 Parts Centrals AccessoriesFAN KIT GA2100A Manual ShutoffODS/Pilot IllustratedParts BreakdownKEY Part Number Description QTY RN30B Parts ListRN30BT RN30BT Parts List Illustrated CGN18B Parts List Warranty Information Limited Warranty VENT-FREE HeatersInternational

RN30BT specifications

The Desa RN30BT is a highly regarded heating solution known for its efficiency, versatility, and contemporary design. As a compact and stylish unit, it fits seamlessly into any modern living space while providing optimal warmth and comfort. The RN30BT is not just a heater; it’s an advanced appliance equipped with a range of features designed to enhance the user experience.

At the core of the Desa RN30BT is its innovative heating technology. It utilizes advanced infrared heating which warms objects and individuals in the room rather than merely heating the air. This makes it more energy-efficient, allowing users to enjoy a comfortable environment without excessive energy consumption. The infrared heating technology also ensures that the warmth is felt almost instantaneously, a feature that is particularly appreciated during cold months.

The RN30BT comes with a user-friendly digital control panel. This feature allows users to set and monitor the desired temperature with ease. Additionally, the integrated timer function provides the flexibility to schedule heating periods, enabling users to pre-warm their spaces before returning home. This enhances convenience while also promoting energy savings.

One of the standout characteristics of the Desa RN30BT is its portability. It is designed with lightweight materials and features durable wheels, making it easy to move from one room to another. This flexibility allows users to heat different areas of their homes as needed, catering to specific heating requirements throughout the day.

Safety is paramount in the design of the RN30BT. The heater includes a range of safety features such as overheat protection and a tip-over switch that automatically shuts off the unit if it is knocked over, providing peace of mind for households with children or pets.

In terms of aesthetics, the Desa RN30BT sports a sleek and modern design that complements various interior styles. Its contemporary appearance means that it can blend in seamlessly with home décor while providing effective heating performance.

Overall, the Desa RN30BT stands out as a highly functional and stylish heating solution. With its efficient infrared technology, user-friendly controls, portability, and robust safety features, it is an ideal choice for those seeking a reliable and effective way to keep their living spaces warm and inviting throughout the colder seasons.
Top Page Image Contents