Desa RN30BT installation manual Connecting to GAS Supply

Page 10

CONNECTING TO GAS SUPPLY

10

NOTICE

A qualified service person must connect heater to gas supply. Follow all local codes.

!WARNING

Never connect heater to private (non-utility) gas wells. This gas is commonly known as well-head gas.

IMPORTANT: Check gas line pressure before connecting heater to gas line. Gas line pressure must be no greater than 14 inches of water. If gas line pressure is higher, heater regulator damage could occur.

!CAUTION

Use only new, black iron or steel pipe. Copper tubing may be used in certain areas. Check your local codes. Use pipe of 1/2" diameter or greater to allow proper gas volume to heater. If pipe is too small, undue loss of pressure will occur.

Installation must include a manual shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figure 11, page 11).

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in the pipe could result in clogged heater valves.

!CAUTION

Use pipe joint sealant that is resistant to liquid petroleum (LP) gas.

Install sediment trap in supply line as shown in Figure 11. Locate sediment trap where it is within reach for cleaning. Locate sediment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Safety Information Piezo Ignition System Local Codes Unpacking Product FeaturesSafety Device Thermostatic Heat Control Thermostat Model OnlyCheck GAS Type Installation ItemsLocating Heater Locating Thermostat Sensing Bulb Thermostat Sensing BulbAttaching Thermostat Sensing Bulb Removing Front Panel Of Heater Installing Heater to WallMounting Bracket Methods For Attaching Mounting Bracket To WallMarking Screw Locations Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply To GAS Supply ConnectingPressure Testing GAS Supply Piping System Checking GAS ConnectionsPressure Testing Heater GAS Connections Manual Shutoff ValveOperating Heater For Your Safety Read Before LightingLighting Instructions Pilot To Turn OFF GAS to Appliance Manual Lighting ProcedureThermostat Control Operation Non-Thermostat Models GRH/OV 007G Inspecting Burner Pilot Flame PatternCorrect Flame Pattern AT High Position Burner Flame PatternIncorrect Flame Pattern AT High Position ODS/PILOT and Burner Cleaning and Maintenance Trouble ShootingObserved Possible Problem Cause Remedy CabinetCleaning and Mainte TROUBLE- ShootingFrom Ing statement at Observed Possible Problem CauseTop Parts Under Warranty Technical ServiceService Hints Replacement Parts Parts Not Under WarrantyManual Shutoff Parts Centrals AccessoriesFAN KIT GA2100A Floor Mounting Stand GA4000Breakdown IllustratedParts ODS/PilotRN30B Parts List KEY Part Number Description QTYRN30BT RN30BT Parts List Illustrated CGN18B Parts List Limited Warranty VENT-FREE Heaters Warranty InformationInternational

RN30BT specifications

The Desa RN30BT is a highly regarded heating solution known for its efficiency, versatility, and contemporary design. As a compact and stylish unit, it fits seamlessly into any modern living space while providing optimal warmth and comfort. The RN30BT is not just a heater; it’s an advanced appliance equipped with a range of features designed to enhance the user experience.

At the core of the Desa RN30BT is its innovative heating technology. It utilizes advanced infrared heating which warms objects and individuals in the room rather than merely heating the air. This makes it more energy-efficient, allowing users to enjoy a comfortable environment without excessive energy consumption. The infrared heating technology also ensures that the warmth is felt almost instantaneously, a feature that is particularly appreciated during cold months.

The RN30BT comes with a user-friendly digital control panel. This feature allows users to set and monitor the desired temperature with ease. Additionally, the integrated timer function provides the flexibility to schedule heating periods, enabling users to pre-warm their spaces before returning home. This enhances convenience while also promoting energy savings.

One of the standout characteristics of the Desa RN30BT is its portability. It is designed with lightweight materials and features durable wheels, making it easy to move from one room to another. This flexibility allows users to heat different areas of their homes as needed, catering to specific heating requirements throughout the day.

Safety is paramount in the design of the RN30BT. The heater includes a range of safety features such as overheat protection and a tip-over switch that automatically shuts off the unit if it is knocked over, providing peace of mind for households with children or pets.

In terms of aesthetics, the Desa RN30BT sports a sleek and modern design that complements various interior styles. Its contemporary appearance means that it can blend in seamlessly with home décor while providing effective heating performance.

Overall, the Desa RN30BT stands out as a highly functional and stylish heating solution. With its efficient infrared technology, user-friendly controls, portability, and robust safety features, it is an ideal choice for those seeking a reliable and effective way to keep their living spaces warm and inviting throughout the colder seasons.
Top Page Image Contents